Page 1 of 8 123 ... LastLast
Results 1 to 10 of 78

Thread: Public Release: Apr 23, 2013

  1. #1
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,119

    Default Public Release: Apr 23, 2013

    The official public release of the EFILive software is now available for all EFILive customers.

    EFILive encourages customers to use this public release in their production environments.

    Download here:

    Known Issues:
    Please post issues, questions, clarifications (large or small) in this thread.
    As issues are reported and confirmed they will be re-posted as "Known Issues" below.
    Known issues that have been flagged as (fixed) are available using the "Check for Updates" option in the EFILive start menu, or by directly downloading the latest software available in the link above.

    Fixed issues:

    • The THRA_A and THRA_B PIDs are not scaled correctly. (fixed)
    • Due to Windows security restrictions, the V7 and V8 installer is not automatically updating some files in \My Documents\EFILive. (fixed)
    • Tuning support for some E39A operating systems were missed in the Apr 20 release. (fixed)


    Current issues:

    • If you have the latest version of V7.5 installed, then uninstall it and re-install the same or earlier version some configuration files will not be initialized correctly. To force EFILive to initialize the configuration files you must do this: After uninstalling and prior to re-installing the same (or earlier) version, delete the registry key: \\HKEY_CURRENT_USER\Software\EFILive\V7.5\Properti es\Dir\UniqueID. Then re-run either the V7 Scan or Tune software which will force the config files to be re-initialized and the UniqueID registry key to be set again (fixed in next update).
    • Auto-unlocking E38 controllers (that have previously been auto-locked) fails with error $0322. Workaround: set the auto-lock flag in the file being flashed when flashing an E38 controller that is already auto-locked. That will prevent the reflash process from attempting to auto-unlock the E38 controller. Unfortunately, that also means you cannot auto-unlock an E38 controller until the problem is resolved in the next update (fixed in next V8 update) The fix is available now via attached E38_auto_unlock.zip file; see Updates section below.
    • AutoCal LCD display may display some text with missing characters or even an entirely blank screen (fixed in next firmware update).
    • For some VPW controllers, FlashScan/AutoCal are not saving System Readiness Test Results and/or Freeze Frame data when "Record All Diags" is selected in BBX mode (fixed in next firmware update).
    • Allow 32 pre-selected calculated PIDs per Black Box Log file (up from 8) (fixed in next firmware update).
    • LML flashing is not active yet (fixed in next V8 update).
    • PID selection list auto expands/collapses when selecting PIDs (fixed in next V8 update).
    • Explorer asks for confirmation twice when copying files to FlashScan/AutoCal that already exist (fixed in next V8 update).
    • Explorer does not refresh the top pane when copying files from FlashScan/AutoCal to the PC (fixed in next V8 update).


    Updates:
    The E38 auto-unlock problem can be resolved by performing the following steps:

    1. Download the attached E38_auto_unlock.zip file
    2. Unzip the contents of the file into the folder:
      \Program Files\EFILive\V8\Config (on 32 bit machines)
      or
      \Program Files\EFILive (x86)\V8\Config (on 64 bit machines)
    3. When unzipping the files, overwrite the existing files.


    Version Numbers:
    After installing the latest release you should have the following software, boot block, firmware versions installed:

    EFILive V7 software: V7.5.7 Build 230

    To view the installed version, select Help->About (in the V7 Scan or Tune software).

    EFIlive V8 software: V8.2.2 Build 224
    To view the installed version, select Help->About (in the V8 Scan and Tune software).

    Boot Block: V2.07.04 (Dec 12, 2011
    )
    To view the installed version, Select F7: Licenses (in the V8 Scan and Tune software).

    Firmware: V2.07.39 (Apr 23, 2013)
    To view the installed version, Select F7: Licenses (in the V8 Scan and Tune software)
    Attached Files Attached Files
    Last edited by Blacky; May 14th, 2013 at 02:52 PM.
    Before asking for help, please read this.

  2. #2
    Lifetime Member tokymon's Avatar
    Join Date
    Apr 2008
    Posts
    227

    Default

    sub'd
    97 2500 ecsb 5.7l/4l80e/4x4 411 pcm /thorley tri-y's/dual super 40's with x (catless)/aem cai/msd 6a and coil/zz4 cam/beehive spring/lm-1

    stock sucks

  3. #3
    Member
    Join Date
    Dec 2006
    Posts
    94

    Default

    Have tried numerous times to download the V8 update--I have version 204--and have received this:

    Not Found

    The requested URL /Software/V8/Patch/EFILiveV8_Patch.exe was not found on this server.
    Apache/2.2.14 (Ubuntu) Server at download.efilive.com Port 80

    I will try later

  4. #4
    Member
    Join Date
    Oct 2011
    Posts
    93

    Default

    Tried to full flash a vette file in a fbody ls1b (computer swap) with v7 and it kept saying complete without actually flashing. Worked fine in v8 figured I'd mention.

  5. #5
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,777

    Default

    Quote Originally Posted by Gordy M View Post
    Have tried numerous times to download the V8 update--I have version 204--and have received this:

    Not Found

    The requested URL /Software/V8/Patch/EFILiveV8_Patch.exe was not found on this server.
    Apache/2.2.14 (Ubuntu) Server at download.efilive.com Port 80

    I will try later
    Goto the link above and manually download the .exe file.

  6. #6
    Forum tyhee Site Admin GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    12,780

    Default

    Quote Originally Posted by ls1mike View Post
    Tried to full flash a vette file in a fbody ls1b (computer swap) with v7 and it kept saying complete without actually flashing.
    Usually because of non Admin priveleges in Windows.
    Need official EFILive help, please go here.
    For tuning support please post your questions on this forum (or other auto forums).
    Sorry if I don't respond to your PM, don't take it personal.


  7. #7
    Lifetime Member
    Join Date
    Dec 2005
    Posts
    266

    Default

    When viewing BBL while connected to a vehicle. The PID name shows what the Custom PID properties were changed to. Not PID name.
    Example: Changing the Custom PID properties for EGT1A to F. F displays in the screen not EGR1A.
    So all my custom PID properties that are changed. I do not know what the PID name is.

    Also when opening V7.5 EFILive Toon Tool or EFILive Scan Tool. The time it take to open and close is longer than prior release. At time I get Not Responding.

    Running Windows 7 64
    2011 LML 3500HD CC D/A 4x4
    2006 LBZ 3500 CC D/A 4x4 Sold
    2001 LB7 2500HD D/A 4x4 Sold

  8. #8
    Lifetime Member
    Join Date
    Dec 2005
    Posts
    266

    Default

    I was able to correct the problem by editing the Options.txt file

    ; (LML|Travel)
    *PSL_01
    ECM.DPFRGENC, N:::0:1.000000:0.000000:N, 0.000000:N:0.000000:N:0:0:0
    TCM.GEAR, N:::0:1.000000:0.000000:N, 0.000000:N:0.000000:N:0:0:0
    ECM.RPM, N:::0:1.000000:0.000000:N, 0.000000:N:0.000000:N:0:0:0
    ECM.DSTDPFR, Y:miles:mile:1:0.621371:0.000000:N, 0.000000:N:100.000000:N:0:10:0
    ECM.FUDPFR, Y::gal:1:0.264172:0.000000:N, 0.000000:N:100.000000:N:0:10:0
    ECM.EGT1A, N:°F:°F:1:1.800000:32.000000:N, 0.000000:N:100.000000:N:0:10:0
    ECM.EGT2A, Y:°F:°F:1:1.800000:32.000000:N, 0.000000:N:100.000000:N:0:10:0

    Deleted these in red and fixed the problem.
    2011 LML 3500HD CC D/A 4x4
    2006 LBZ 3500 CC D/A 4x4 Sold
    2001 LB7 2500HD D/A 4x4 Sold

  9. #9
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,777

    Default

    Quote Originally Posted by Biodiesel66 View Post
    When viewing BBL while connected to a vehicle. The PID name shows what the Custom PID properties were changed to. Not PID name.
    Example: Changing the Custom PID properties for EGT1A to F. F displays in the screen not EGR1A.
    So all my custom PID properties that are changed. I do not know what the PID name is.

    Also when opening V7.5 EFILive Toon Tool or EFILive Scan Tool. The time it take to open and close is longer than prior release. At time I get Not Responding.

    Running Windows 7 64
    Press the Enter key on the V2 keypad to switch between custom and standard pids.

    When opening the V7 scantool/tunetool, is PC connected to V2, and/or is V8 connected to V2...?

  10. #10
    Lifetime Member
    Join Date
    Mar 2006
    Posts
    4,798

    Default

    Paul/Ross,
    It would be great to have the TQ model added to the E40s, I thought it was already there until I was looking over an E40 tune today. Thanks!
    ~Erik~
    2013 Sonic RS Manual - 1.4L I4T E78, starting the mods
    2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
    2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.

Page 1 of 8 123 ... LastLast

Similar Threads

  1. Public release, March 29, 2012
    By Blacky in forum Software Updates and Installation Help
    Replies: 128
    Last Post: June 22nd, 2012, 03:53 AM
  2. Public Release Update July 03, 2011
    By Blacky in forum Software Updates and Installation Help
    Replies: 40
    Last Post: July 17th, 2011, 07:21 AM
  3. Public Release June 03, 2011
    By Blacky in forum Software Updates and Installation Help
    Replies: 71
    Last Post: July 9th, 2011, 06:59 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •