Originally Posted by
VX-SS-383
A0009 Boost VE doesn't seem right (and looks too smooth).
*Didnt realise anything was there,does it even use this table?car is n/a
If you don't have boost then ignore A0009.
B3618 is too restrictive above 3200 rpm... set that portion to 35%.
*Might seem silly but what do you mean by 35%? set it 35% higher or lower?
The table is TP with units %... above 3200 rpm set it to 35% (look at 2002 Camaro file for example).
*Ive fixed everything else that you mentioned.
With the spark map im pretty sure it only uses the low octane map
any when your mafless? i just modded the high octane
and made the low octane identical or should they be different?
COS's enable adaptive spark when MAF-less (i.e. spark timing slides between HO and LO tables according to presence/intensity of knock).
I also did a log and P0336 came up crankshaft position sensor,its missing quite bad under 80-100% throttle.
Ive attached a log,couldnt really give it much it would just break down
and throw the cel on.
I'll take a look at your log later tonite.