Results 1 to 10 of 10

Thread: fast injectors

  1. #1
    Lifetime Member tokymon's Avatar
    Join Date
    Apr 2008
    Posts
    227

    Default fast injectors

    does any body have the data for 65# fast injectors for l76 ( 08 g8)
    i know they dont have very good info for them just need a point to start.
    i will have to scale the tune (1/2 ifr,2x stoik)



    please move to gen 4
    97 2500 ecsb 5.7l/4l80e/4x4 411 pcm /thorley tri-y's/dual super 40's with x (catless)/aem cai/msd 6a and coil/zz4 cam/beehive spring/lm-1

    stock sucks

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    ok, moved.

  3. #3
    Lifetime Member tokymon's Avatar
    Join Date
    Apr 2008
    Posts
    227

    Default

    just finished online with tech support they sent me off sets then directed me to gregs dvd. every thing i have read there data is not on gregs dvd.
    can some one correct me if there on the dvd
    97 2500 ecsb 5.7l/4l80e/4x4 411 pcm /thorley tri-y's/dual super 40's with x (catless)/aem cai/msd 6a and coil/zz4 cam/beehive spring/lm-1

    stock sucks

  4. #4
    Lifetime Member tokymon's Avatar
    Join Date
    Apr 2008
    Posts
    227

    Default

    bump
    97 2500 ecsb 5.7l/4l80e/4x4 411 pcm /thorley tri-y's/dual super 40's with x (catless)/aem cai/msd 6a and coil/zz4 cam/beehive spring/lm-1

    stock sucks

  5. #5
    Senior Member
    Join Date
    Apr 2009
    Posts
    178

    Default

    I cannot guarantee that whatever FAST is selling is the same as the SD60's (FRPP part# -LU60) that I included in my DVD's data disc. I know that some of the injectors that FAST was selling were just redrilled stock units, so their actual characterization data could be anyone's guess. I do not have any useful data on redrilled injectors.
    ~Greg
    Calibrated Success - EFI Training and Tuning Done Right
    GM Beginner's Guide DVD available now through Summit!
    Engine Management: Advanced Tuning - Amazon's best deal for the EFI crowd.

  6. #6
    New Member
    Join Date
    Oct 2011
    Posts
    6

    Default

    I used the 50LB FAST injectors and left stock values except for flow rate, which I just scaled as a percentage over the stock injectors. They are working without any issues. I called FAST about injector info and had no help from them what so ever.

  7. #7
    Junior Member
    Join Date
    Oct 2009
    Posts
    38

    Default

    I am in need of the injector data also.
    Bump

  8. #8
    Lifetime Member tokymon's Avatar
    Join Date
    Apr 2008
    Posts
    227

    Default

    imo sell them we went id850's ( i sent back the other 3 sets i had not used from fast)
    97 2500 ecsb 5.7l/4l80e/4x4 411 pcm /thorley tri-y's/dual super 40's with x (catless)/aem cai/msd 6a and coil/zz4 cam/beehive spring/lm-1

    stock sucks

  9. #9
    Lifetime Member
    Join Date
    Mar 2006
    Posts
    4,935

    Default

    ID850s are a lot easier to tune...just install then plug the data in (and scale the tune if need be).
    ~Erik~
    2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
    2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
    2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.

  10. #10
    Lifetime Member EagleMark's Avatar
    Join Date
    Dec 2010
    Posts
    466

    Default

    I was wondering why I had not received a return tech support when asking for 36 lb injector data?

    What would a good choice of 36lb injectors to buy with data sheets?

Similar Threads

  1. Fast 65# ls3 injectors
    By boostedyards86 in forum Gen IV V8 Specific
    Replies: 2
    Last Post: August 11th, 2011, 10:20 AM
  2. IFR table values with 36LB FAST injectors
    By Kurtomac in forum Gen III V8 Specific
    Replies: 8
    Last Post: July 6th, 2008, 10:33 AM
  3. New FAST Injectors
    By grfperformance in forum Gen IV V8 Specific
    Replies: 4
    Last Post: March 18th, 2008, 05:04 AM
  4. 96lb/hr injectors can be run like stock injectors with EFILIVE!!
    By nitrorocket in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: July 24th, 2006, 02:14 PM
  5. Going from 28.8 injectors to SVO 30# injectors
    By 02 pewter Ls1 in forum General (Petrol, Gas, Ethanol)
    Replies: 15
    Last Post: June 20th, 2005, 12:47 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •