EFILive encourages customers to use this public update in their production environments.
Important:
This latest software update requires updated USB drivers (V2.08.28). You cannot use this version of the software with older versions of the USB drivers.
If you are having difficulty connecting to FlashScan/AutoCal after installing this update, DO NOT DOWNGRADE THE USB DRIVERS. The problem is possibly a USB 2.0/3.0 incompatibility.
Try using FlashScan/AutoCal in a USB 2.0 port instead of a USB 3.0 port.
Download here:
Updates:
V7
- Automatically generate \My Documents\EFILive\V7.5 folder hierarchy if it does not exist at application start-up.
- *.cax files may not contain any user defined calibrations that overlap existing EFILive calibration definitions or that reference data outside of the calibration memory area. If they do, the user will be notified that the *.cax calibration will be ignored.
- *.ctz files with V8 security restrictions (cal-only, flash-only) can no longer be loaded into the V7 software.
V8
- LML cal-flash and full-flash is now available.
- Automatically generate \My Documents\EFILive\V8 folder hierarchy if it does not exist at application start-up.
- Stopped PID selection lists from auto-expanding/collapsing when selecting PIDs in Scan Tool and BBX tab pages.
- Auto-Locked E38 controllers can now be auto-unlocked successfully.
- Explorer was asking for overwrite permission twice when copying files, now it only asks once.
- Explorer now refreshes top pane correctly when dragging/dropping files from device to PC.
- When reporting OS mismatch, error message now shows "Unknown" (instead of -1 or $FFFFFFFF) for operating system number
Firmware
- Fixed AutoCal LCD screen display corruption.
- Fixed "Record All Diags" option to include freeze frames and System Readiness Tests.
- Increased pre-defined calculated PIDs per BBL PID selection from 8 to 32.
- Updated USB drivers to V2.08.28.
Drivers
Known Issues:
Please post issues, questions, clarifications (large or small) in this thread.
As issues are reported and confirmed they will be re-posted as "Known Issues" below.
- FlashScan and AutoCal Version numbers and version dates do not display in the EFILive Control Panel (aka EFILive_HAPI) application on the [F6: Firmware] tab page (fixed in next update).
- PID custom units are not being loaded correctly when opening a BBX configuration file (fixed in next update).
- Copy/Paste of BBX PIDs does not copy the custom units or alarm settings (fixed in next update).
- BBX PID display order is not being maintained (fixed in next update).
- Connecting FlashScan or AutoCal to USB3.0 ports may cause very slow connections or no connection at all - try using a USB 2.0 port instead (under investigation).
- Clicking [Display Image] in EFILive Explorer on the [F11: Splash] tab page causes a "$0101: No data received" error after 5 seconds (fixed in next update).
- LS1A and LS1B controllers report as "Locked with a custom key" when attempting to read or flash using V7.5. Use V8 to read/flash LS1A and LS1B controllers (fixed in next update).
- BBx option "Record All Diags" does not save freeze frame data (fixed in next update).
- BBx option "Record All Diags" does not show monitor supported status (fixed in next update).
Version Numbers:
After installing the latest release you should have the following software, boot block, firmware versions installed:
EFILive V7 software: V7.5.7 Build 231
To view the installed version, select Help->About (in the V7 Scan or Tune software).
EFILive V8 software: V8.2.2 Build 225
To view the installed version, select Help->About (in the V8 Scan and Tune software).
Boot Block: V2.07.04 (Dec 12, 2011)
To view the installed version, Select F7: Licenses (in the V8 Scan and Tune software).
Firmware: V2.07.40 (May 10, 2013)
To view the installed version, Select F7: Licenses (in the V8 Scan and Tune software)
Update: May 15, 2013
