Update: May 20, 2013

[Blacky]

Close all EFILive applications.
Run the program:
\Program Files\EFILive\Drivers\Utilities\FT_Prog_v1.12\FT_P ROG.exe
(it can take a while for it to start, about 10-20 seconds)

Select the menu option Devices->Scan and Parse.
Let me know if you see the following information exactly as shown in the image below.
(The LocID will most likely be different - that's just the ID of the USB port into which FlashScan is plugged)



Regards
Paul

[shay]

Close all EFILive applications.
Run the program:
\Program Files\EFILive\Drivers\Utilities\FT_Prog_v1.12\FT_P ROG.exe
(it can take a while for it to start, about 10-20 seconds)

Select the menu option Devices->Scan and Parse.
Let me know if you see the following information exactly as shown in the image below.
(The LocID will most likely be different - that's just the ID of the USB port into which FlashScan is plugged)



Regards
Paul

Hi thanks
It's look same
Thanks
shay

[shay]

Thnks paul for yours help.
I did System Restore and now it's good.

I have other question: why the LML E86 is not on the list of the tune?
Do you think in the future EFILive will support LGH ??
Thnks
shay

[Blacky]

Thnks paul for yours help.
I did System Restore and now it's good.

I have other question: why the LML E86 is not on the list of the tune?
Do you think in the future EFILive will support LGH ??
Thnks
shay

The LML E86 is supported for flashing only in the V8 software.
It is not possible to read the contents of the E86 via the OBDII port.

I presume the LGH use an E86 the same as the LML, if so then it will be supported the same as the E86 (flashing only).

Regards
Paul

[shay]

The LML E86 is supported for flashing only in the V8 software.
It is not possible to read the contents of the E86 via the OBDII port.

I presume the LGH use an E86 the same as the LML, if so then it will be supported the same as the E86 (flashing only).

Regards
Paul

How it's work?
1. You will send me the modified or Stock cal file for the E86 and I flashing via OBD-II ??
2. What is the price for flashing one ECM?

[Blacky]

How it's work?
1. You will send me the modified or Stock cal file for the E86 and I flashing via OBD-II ??
2. What is the price for flashing one ECM?

No, we do not supply stock or modified cals for E86.

The tuners that are using EFILive's flashing option for E86 extract the calibration from the E86 by reading the flash chips directly from the E86 using a dedicated hardware interface.
EFILive provides and import facility to import the 3 raw binary files that are produced by that dedicated hardware interface.

The import option is available in the V8 software under [F8: Tools] -> [F3: Import]

Flashing an ECM requires a single VIN license. Each VIN license costs USD 125.
https://www.efilive.com/index.php?pa...mart&Itemid=54

Regards
Paul

[cindy@efilive]

How it's work?
1. You will send me the modified or Stock cal file for the E86 and I flashing via OBD-II ??
2. What is the price for flashing one ECM?

Further to Paul's post, you will find a detailed write up on how LML will work with our software, and the challenges it presents to tuners in our March newsletter.

Here is the link http://myemail.constantcontact.com/E...id=mP_ob71EhBE

Cheers
Cindy

[shay]

Can I buy Stream license for A86?

[GMPX]

No, there is no stream for the E86 ECM.

[Blacky]

New Update posted here:
http://forum.efilive.com/showthread....937#post191937

Regards
Paul