Page 1 of 6 123 ... LastLast
Results 1 to 10 of 53

Thread: Update: May 25, 2013

  1. #1
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,128

    Default Update: May 25, 2013

    EFILive encourages customers to use this public update in their production environments.

    Important:
    This latest software update requires updated USB drivers (V2.08.28). You cannot use this version of the software with older versions of the USB drivers.
    If you are having difficulty connecting to FlashScan/AutoCal after installing this update, DO NOT DOWNGRADE THE USB DRIVERS.

    Download here:

    Updates:
    V7

    • None.

    V8

    • On BBX window the "Space Available" meter disappeared when View->Small Buttons was active.
    • Saving a BBX configuration file would cause the custom units for PIDs to be lost.
    • Access Violation could occur when reading a BBX configuration file from Disk or from a FlashScan/AutoCal device.

    Firmware

    • Fixed corrupt "System Readiness Tests" result display.


    Known Issues:
    Please post issues, questions, clarifications (large or small) in this thread.
    As issues are reported and confirmed they will be re-posted as "Known Issues" below.

    Version Numbers:
    After installing the latest release you should have the following software, boot block, firmware versions installed:
    EFILive V7 software: V7.5.7 Build 233
    To view the installed version, select Help->About (in the V7 Scan or Tune software).

    EFILive V8 software: V8.2.2 Build 227
    To view the installed version, select Help->About (in the V8 Scan and Tune software).

    Boot Block: V2.07.04 (Dec 12, 2011
    )
    To view the installed version, Select F7: Licenses (in the V8 Scan and Tune software).

    Firmware: V2.07.42 (May 25, 2013)
    To view the installed version, Select F7: Licenses (in the V8 Scan and Tune software)
    Last edited by Blacky; June 5th, 2013 at 03:27 PM.
    Before asking for help, please read this.

  2. #2
    Senior Member
    Join Date
    Dec 2006
    Posts
    182

    Default

    Thank you for the update

  3. #3
    Lifetime Member Chavez91's Avatar
    Join Date
    Dec 2012
    Posts
    214

    Default

    Trying to read my 5 speed Allison tune... It gets to the "Trying MFG Key" then I get "ERROR: $0331"
    Josh
    '04 LLY
    *L5P, Standalone, Built Trans*
    Coming Soon

    '05 LLY
    *Built Mota, Built Trans*

  4. #4
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,128

    Default

    Quote Originally Posted by Chavez91 View Post
    Trying to read my 5 speed Allison tune... It gets to the "Trying MFG Key" then I get "ERROR: $0331"
    Try reading with the "Try Alt Keys" and/or "Assume Lock is Faulty" check boxes checked.

    Regards
    Paul
    Before asking for help, please read this.

  5. #5
    Lifetime Member zfuller123's Avatar
    Join Date
    Jan 2010
    Posts
    1,026

    Default

    having issues after bench reading an LMM in v8. after 15 second countdown, get an error saying merge error... "...\program files...\v8\merge\...." can't find merge.cmz or something like that. Trying a clean install right now running as administrator again.
    2005 Crew Cab Dually Duramax

    Big turbos, big injectors, big pumps, crazy heads AND a flux capacitor...
    Best run so far on street tires: 11.14 @ 128.8 mph


  6. #6
    Lifetime Member 2007 5.9's Avatar
    Join Date
    Nov 2010
    Posts
    1,834

    Default

    Couldn't open V7.5 Tune Tool with V2 plugged in for a LONG time after install. Now after a shutdown and restart it opens fine...FYI.
    Les Szmidt
    2007 5.9 Dodge Ram
    2014 Ram 3500 Aisin tuning Emissions Equipped
    EFI Live Cummins BETA Tester
    Silver Bullet Tuning
    silverbullettuning@gmail.com
    www.youtube.com/ljszmidt
    http://www.facebook.com/SilverBulletTuninig

  7. #7
    Lifetime Member wesam's Avatar
    Join Date
    May 2010
    Posts
    620

    Default

    OK I update the software to the latest version
    I Pulled the tune from 2013 V6 Camaro E39A ECM yesterday
    I had a strange problem after pulling the tune file i uploaded the file twice to the car after some modifications then i could not open the file using V7.5 even i tried to read the file which i uploaded to the car then save it and open it via V7.5 but an error message shown that its a bad file format i attached the screen shot
    by the way I still could open the first file i pulled from car and the second file i modified but not the third one

    Click image for larger version. 

Name:	e39a.JPG 
Views:	153 
Size:	57.0 KB 
ID:	15177
    EFILive Tuner

  8. #8
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,128

    Default

    Quote Originally Posted by wesam View Post
    OK I update the software to the latest version
    I Pulled the tune from 2013 V6 Camaro E39A ECM yesterday
    I had a strange problem after pulling the tune file i uploaded the file twice to the car after some modifications then i could not open the file using V7.5 even i tried to read the file which i uploaded to the car then save it and open it via V7.5 but an error message shown that its a bad file format i attached the screen shot
    by the way I still could open the first file i pulled from car and the second file i modified but not the third one

    Click image for larger version. 

Name:	e39a.JPG 
Views:	153 
Size:	57.0 KB 
ID:	15177
    The calibration in that ECM is not properly supported by the EFILive software yet. We will complete support for it in the next major update.

    Regards
    Paul
    Before asking for help, please read this.

  9. #9
    Lifetime Member
    Join Date
    Mar 2006
    Posts
    4,814

    Default

    Came across an unsupported E78 and T76 today, should I email the files to support AT efilive.com?
    ~Erik~
    2013 Sonic RS Manual - 1.4L I4T E78, starting the mods
    2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
    2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.

  10. #10
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,128

    Default

    Quote Originally Posted by ScarabEpic22 View Post
    Came across an unsupported E78 and T76 today, should I email the files to support AT efilive.com?
    Yes please.
    Regards
    Paul
    Before asking for help, please read this.

Page 1 of 6 123 ... LastLast

Similar Threads

  1. Update: May 20, 2013
    By Blacky in forum Software Updates and Installation Help
    Replies: 49
    Last Post: May 24th, 2013, 03:25 PM
  2. Update: May 15, 2013
    By Blacky in forum Software Updates and Installation Help
    Replies: 43
    Last Post: May 22nd, 2013, 06:01 AM
  3. EFILive RC 4 (April 10, 2013)
    By Blacky in forum Software Updates and Installation Help
    Replies: 89
    Last Post: April 22nd, 2013, 02:07 AM
  4. EFILive RC 2 (March 28, 2013)
    By Blacky in forum Software Updates and Installation Help
    Replies: 25
    Last Post: April 8th, 2013, 11:24 PM
  5. EFILive RC 1 (March 01, 2013)
    By Blacky in forum Software Updates and Installation Help
    Replies: 35
    Last Post: March 27th, 2013, 09:00 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •