Update: May 25, 2013

[joecar]

2.7.42

Read All Diagnostics

the Freeze Frames are missing again, compare attached files...

DTC_1547.txt: 2.7.41
DTC_1558.txt: 2.7.42



Also, in the saved file the monitors supported and monitor states being split into two groups is good...

but when viewing the monitors on the V2 LCD is there a way of making it more compact (e.g. as in a previous version: ready, pending, n/a)...?

[Blacky]

2.7.42

Read All Diagnostics

the Freeze Frames are missing again, compare attached files...

DTC_1547.txt: 2.7.41
DTC_1558.txt: 2.7.42



Also, in the saved file the monitors supported and monitor states being split into two groups is good...

but when viewing the monitors on the V2 LCD is there a way of making it more compact (e.g. as in a previous version: ready, pending, n/a)...?

That's weird that the FF are missing again :( I'll check it out.

The SRT results must show "Complete" for tests that are not supported (the "Not Supported" part is optional). That means the testing technician only has to see all tests showing as "Complete" regardless of whether they are supported or not. I guess CARB thought it was too complicated to get a testing technician to check whether a test is supported or not - sigh!!!

No real way to display both values on one line - especially on AutoCal.

But I would rather report it the compact way, I'll see if I can come up with something...

Regards
Paul
Regards
Paul

[ScarabEpic22]

Yes please.
Regards
Paul

Sent.

[joecar]

...

The SRT results must show "Complete" for tests that are not supported (the "Not Supported" part is optional). That means the testing technician only has to see all tests showing as "Complete" regardless of whether they are supported or not. I guess CARB thought it was too complicated to get a testing technician to check whether a test is supported or not - sigh!!!

No real way to display both values on one line - especially on AutoCal.

...

So the unsupported ones are always ready...

so actually there are 4 states (of which one is not legal).

Yes, the hard part is designing sutiable abbreviated display labels to fit the V2/AC LCD...
[ e.g. RDY (ready/supported), PND (pending/supported), CMP (complete/unsupported), INC (incomplete/unsupported) ]


But note: in the "Read All Diags" saved file, do leave them grouped separately, that has its own special value (when looking at C6001, C6002 in the tune file).

[joecar]

2.7.42

Read CVN, Read All Diags:

The CVN's are showing up as zeros, see attached.

[joecar]

Also, for an unsupported OS, the CVN's part number reads as zero (but this doesn't really matter, unless it's a bug), see attached:

[joecar]

2.7.42

Freeze Frame funny characters on V2 LCD (up-arrows, down-arrows), see attached:

[joecar]

continuing...

[joecar]

Also notice that in the DTC txt file the date is wrong (off by one month)... I did Set Now in HAPI.

[Blacky]

2.7.42

Read CVN, Read All Diags:

The CVN's are showing up as zeros, see attached.

Hi Joe,

I can't make the CVN's show up as zero on my test LS1 here. Can you make them show zero on yours there, then save a trace file and send me the trace file, thanks?

Regards
Paul