Update: May 25, 2013

[joecar]

Reminder to self:

Hi Joe,

I can't make the CVN's show up as zero on my test LS1 here. Can you make them show zero on yours there, then save a trace file and send me the trace file, thanks?

Regards
Paul

It should not show as zero - that would be a bug. What controller was that CVN display taken from?
Can you make that happen again? If so can you save a trace file and send it to me thanks.

Regards
Paul

The dates show up correctly on my test system here.

I presume you meant the "Set Now" option in EFILive Explorer (not HAPI)?
The date/time stored in the file should be within a few seconds of the file's actual date/time stamp.

Can you double check that setting the date correctly still causes the wrong date to be stored in the file?

Regards
Paul

[joecar]

Also, for an unsupported OS, the CVN's part number reads as zero (but this doesn't really matter, unless it's a bug), see attached:

Here is the trace file for this case (un-supported OS 12217063)

[ remove the .txt extension ]

[joecar]

2.7.42

Read CVN, Read All Diags:

The CVN's are showing up as zeros, see attached.

Here is the trace file for this case (supported OS 12212156)

[ remove the .txt extension ]