Page 1 of 3 123 LastLast
Results 1 to 10 of 23

Thread: How to make tune tool mark the selected area in scan tool ?

  1. #1
    Lifetime Member wesam's Avatar
    Join Date
    May 2010
    Posts
    660

    Default How to make tune tool mark the selected area in scan tool ?

    I noticed that the tune tool is not marking the selected area in E78 and E39 ECMs
    So I want to know if there is a procedure to make this hapen as in LS1B and E38

    Thanks in adance
    EFILive Tuner

  2. #2
    Lifetime Member
    Join Date
    Mar 2006
    Posts
    4,935

    Default

    You need to go in and edit the cal_link.txt file, open the file up (save another copy) and add the tables you want to see. I did this for the P10 years ago, just have to copy the text/file over every time you install an update.
    ~Erik~
    2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
    2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
    2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.

  3. #3
    Lifetime Member wesam's Avatar
    Join Date
    May 2010
    Posts
    660

    Default

    Why it was supported for LS1B, E38, E67 but not the newer ECMs like E78 and E39 ?
    EFILive Tuner

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Probably the cal_link.txt file still has to be updated by Paul.

  5. #5
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    [ and of course, in the tunetool properties, under the Scanner tab you have to checkmark "Highlight Scantool Selection", and scantool/tunetool must agree on units ]

  6. #6
    Lifetime Member wesam's Avatar
    Join Date
    May 2010
    Posts
    660

    Default

    Quote Originally Posted by joecar View Post
    Probably the cal_link.txt file still has to be updated by Paul.
    I Hope if he update it soon
    EFILive Tuner

  7. #7
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    If you know what the link pids are, you can edit them in for the relevant tables (multiple link pids are comma separated).

  8. #8
    Lifetime Member wesam's Avatar
    Join Date
    May 2010
    Posts
    660

    Default

    Joe can you make an example for High Octane spark table in E78 so i can edit it until Paul can update it
    EFILive Tuner

  9. #9
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Post your tune file, I'll send you a cal_link file for the HO table.

  10. #10
    Lifetime Member wesam's Avatar
    Join Date
    May 2010
    Posts
    660

    Default

    Here is it
    Please Joe write the lines you will add to the link file so i could know the logic
    Attached Files Attached Files
    EFILive Tuner

Page 1 of 3 123 LastLast

Similar Threads

  1. Replies: 44
    Last Post: July 8th, 2010, 10:06 AM
  2. Scan tool match tune tool?
    By zapp168 in forum Gen III V8 Specific
    Replies: 4
    Last Post: March 20th, 2008, 04:27 AM
  3. Replies: 4
    Last Post: January 6th, 2008, 10:47 AM
  4. Fit to Scan Tool/Tune Tool
    By limited cv8r in forum General
    Replies: 11
    Last Post: March 3rd, 2007, 05:10 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •