Page 13 of 14 FirstFirst ... 311121314 LastLast
Results 121 to 130 of 138

Thread: 600 rpm slip limit solved!!!! OS 25941752

  1. #121
    Junior Member
    Join Date
    Dec 2009
    Posts
    35

    Default

    Quote Originally Posted by THEFERMANATOR View Post
    Have you also lowered the lockup speed in 2nd gear? It doesn't matter if you raise the slip limit, if you are to close to the lockup speed in that gear, the TCM will over ride lockup until the shift is completed. I think this is the issue alot of people are running into with no lockup even after raising the slip limit.
    Ferman - no, I didn't get that far. My biggest frustration turned out to be when I was rolling along on a 2lane and went to stomp it and pass someone. I would slip and slip and slip until the point where I was about to shift to fourth, the. It would finally lock up and drop a few hundred rpm, then shift into 4th and stay locked. It was terrible. Ben's box fixed it instantly.
    2008 LMM

  2. #122
    Lifetime Member THEFERMANATOR's Avatar
    Join Date
    Mar 2009
    Posts
    800

    Default

    I have mine locking pretty consistently, but I will say the TCM does have a rather long delay before it will command lockup even once all conditions are met. The TCM tries to overthink everything to protect the trans.
    1995 GMC 2500 SUBURBAN powered by 01 DURAMAX/ALLISON, little of this, a little of that,
    DIAMONDEYE 4" exhaust, CORSA muffler, AFE stage 1 dry filter, custom tuning by me, KENNEDY single pump and pump rub kit.

  3. #123
    Junior Member
    Join Date
    Dec 2009
    Posts
    35

    Default

    Quote Originally Posted by THEFERMANATOR View Post
    I have mine locking pretty consistently, but I will say the TCM does have a rather long delay before it will command lockup even once all conditions are met. The TCM tries to overthink everything to protect the trans.
    I found no complaints doing it on my buddy's stock turbo LMM, but on my 68stg2r making 100hp over his, no bueno.
    2008 LMM

  4. #124
    New Member
    Join Date
    Dec 2013
    Posts
    5

    Default

    Quote Originally Posted by mitchd View Post
    actually all the slip limit tables in efi are referenced to the wrong memory location as i have discovered based on the fact that i know what table needs to be modified. when i load my working 1200rpm slip limit tune into efi it show me a slip limit of 625rpm, i can change my 1200 limit to anything i like and reload in efi and it still shows 625. its so easy, i dont know how they messed up the reference location.
    Have they fixed this problem with the new update in December?
    02 LB7, EFILive, PPE Boost Valve, 45% Over Injectors, AirDog 165

  5. #125
    Junior Member
    Join Date
    Dec 2009
    Posts
    35

    Default

    I can't say on the latest release, but about 2 months ago in the beta, I was poking around tweaking my tune and for shits/giggles I maxed out the skip limit table (8k I think?), and the funniest thing happened. In tow/haul mode I had the same shift points but no lockup at all. Usually you get mid 2nd lockup - nope. I didn't go beyond the 'hood to see if it would lockup in 5th or WFO but up through 5th gear at 40'ish mph I had the usual feel of t/h but no lockup.
    2008 LMM

  6. #126
    Junior Member
    Join Date
    Dec 2011
    Posts
    14

    Default

    So it's been a while since I've been on here but I recently bought another 2006 LBZ head with a 6-speed Allison and I've been playing around with the slip limit and discovered why it will not work for any of you guys, besides the fact that the wrong table is referenced in EFI live...
    Anybody who wants to send me a 6-speed TCU file I'll patch it send it back and you can let me know that it works! Email me the file
    2007 Classic CCLB, LBZ - EFIlive, Custom 4 inch downpipe and exhaust, Stock trans with BD tripple disk shimmed relief and modded knockdown valve.
    35/12.50/17 Toyo Open country MT's
    1987 Toyota 4x4 8" lift, 35/13.5/15 Toyo open country's, Trail gear suspension, 22r turbo on Propane @ 20psi boost GT2860RS turbo, V6 R150 Transmission.

  7. #127
    Junior Member
    Join Date
    Dec 2009
    Posts
    35

    Default

    loading it in a few mins and taking a quick spin
    2008 LMM

  8. #128
    Junior Member
    Join Date
    Dec 2009
    Posts
    35

    Default

    I took it for just a really quick spin - works!!!! I hammered the throttle and it locked in 2nd no problem. Then I was in 4th and goosed it - she dropped to 3rd and rev'd a little and locked right up. Then I did less than full throttle hit and she locked right up again. This is great!
    2008 LMM

  9. #129
    Senior Member Quinton's Avatar
    Join Date
    Apr 2013
    Posts
    103

    Default 600 rpm slip limit solved!!!! OS 25941752

    Quote Originally Posted by n2brk View Post
    I took it for just a really quick spin - works!!!! I hammered the throttle and it locked in 2nd no problem. Then I was in 4th and goosed it - she dropped to 3rd and rev'd a little and locked right up. Then I did less than full throttle hit and she locked right up again. This is great!
    Could you send me the tune please? He never got back with me
    Last edited by Quinton; December 23rd, 2019 at 10:54 AM.
    [/SIGPIC]
    2005 duramax LLY, 12.75 on stock motor/fuel, 68mm vgt built trans.
    Built motor by me, built trans, EFIlive by me, dual fuelers, 80% injectors.

  10. #130
    Junior Member
    Join Date
    Dec 2011
    Posts
    14

    Default

    check your email, sorry i missed you somehow...enjoy!
    2007 Classic CCLB, LBZ - EFIlive, Custom 4 inch downpipe and exhaust, Stock trans with BD tripple disk shimmed relief and modded knockdown valve.
    35/12.50/17 Toyo Open country MT's
    1987 Toyota 4x4 8" lift, 35/13.5/15 Toyo open country's, Trail gear suspension, 22r turbo on Propane @ 20psi boost GT2860RS turbo, V6 R150 Transmission.

Page 13 of 14 FirstFirst ... 311121314 LastLast

Similar Threads

  1. 600 rpm slip limit
    By killerbee in forum Allison 5 & 6 Speed
    Replies: 14
    Last Post: December 2nd, 2012, 06:00 PM
  2. Fuel and RPM limit question...
    By LBZoom in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 1
    Last Post: June 2nd, 2010, 10:56 AM
  3. speed/RPM limit cancel!!
    By A.O.A in forum General (Petrol, Gas, Ethanol)
    Replies: 26
    Last Post: May 27th, 2009, 04:44 AM
  4. RPM limit
    By IdahoRob in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 91
    Last Post: November 7th, 2008, 04:41 PM
  5. High RPM power loss solved
    By PSWired in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 1
    Last Post: October 16th, 2005, 11:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •