Page 1 of 14 12311 ... LastLast
Results 1 to 10 of 138

Thread: 600 rpm slip limit solved!!!! OS 25941752

  1. #1
    Junior Member
    Join Date
    Dec 2011
    Posts
    14

    Cool 600 rpm slip limit solved!!!! OS 25941752

    Hey guys figured I better make my first post here a good one so here it is, after countless nights awake reversing code in the a40 tcu

    I HAVE FOUND AND AM ABLE TO CHANGE THE FACTORY SLIP LIMIT 625rpm!!!,

    her is a log proving I have done this! I would like to test this on a few others so for anyone who wishes for me to change your limit send me a copy of your stock tcu file and i will change it to whatever you like.

    I got a full binary from ross and decompiled with idapro. There is also two more colums in the tcc on ramp rate that arent available in the current
    efilive calz file, this and 900+ rpm slip at lockup in third will break the tires loose!
    Click image for larger version. 

Name:	933sliplock.jpg 
Views:	1084 
Size:	145.8 KB 
ID:	15224
    Attached Files Attached Files
    2007 Classic CCLB, LBZ - EFIlive, Custom 4 inch downpipe and exhaust, Stock trans with BD tripple disk shimmed relief and modded knockdown valve.
    35/12.50/17 Toyo Open country MT's
    1987 Toyota 4x4 8" lift, 35/13.5/15 Toyo open country's, Trail gear suspension, 22r turbo on Propane @ 20psi boost GT2860RS turbo, V6 R150 Transmission.

  2. #2
    Junior Member
    Join Date
    Dec 2011
    Posts
    14

    Default

    here's a pic of my modified Efilive calibration to edit the slip limit and the whole TCC on ramp rate.
    Click image for larger version. 

Name:	custom cax.jpg 
Views:	1235 
Size:	172.2 KB 
ID:	15227
    2007 Classic CCLB, LBZ - EFIlive, Custom 4 inch downpipe and exhaust, Stock trans with BD tripple disk shimmed relief and modded knockdown valve.
    35/12.50/17 Toyo Open country MT's
    1987 Toyota 4x4 8" lift, 35/13.5/15 Toyo open country's, Trail gear suspension, 22r turbo on Propane @ 20psi boost GT2860RS turbo, V6 R150 Transmission.

  3. #3
    Lifetime Member vortecfcar's Avatar
    Join Date
    Apr 2007
    Posts
    536

    Default

    First of all, congratulations!

    That's a worthy first post if I've ever seen one.

    Did you find this as a simple Hex address or does it require you to patch the O.S. Just curious.

    Ive attached the OS for you to apply the update to, or you can send me the hex adress and ill edit it.

    Either way, welcome to the forum!

    Nick

    ps- Is there a way I can contact you privately? The PM function is not active on your user name.
    Attached Files Attached Files

  4. #4
    Lifetime Member Dmaxink's Avatar
    Join Date
    Nov 2009
    Posts
    1,176

    Default 600 rpm slip limit solved!!!! OS 25941752

    Great work!
    Last edited by Dmaxink; June 1st, 2013 at 11:11 AM.
    -Kory

    I'm out of ideas? Nah trick... When in doubt, 0xFFFF it out!

    http://www.PPEI.com/

  5. #5
    Lifetime Member Dmaxink's Avatar
    Join Date
    Nov 2009
    Posts
    1,176

    Default 600 rpm slip limit solved!!!! OS 25941752

    Quote Originally Posted by mitchd View Post
    Hey guys figured I better make my first post here a good one so here it is, after countless nights awake reversing code in the a40 tcu

    I HAVE FOUND AND AM ABLE TO CHANGE THE FACTORY SLIP LIMIT 625rpm!!!,

    her is a log proving I have done this! I would like to test this on a few others so for anyone who wishes for me to change your limit send me a copy of your stock tcu file and i will change it to whatever you like.

    I got a full binary from ross and decompiled with idapro. There is also two more colums in the tcc on ramp rate that arent available in the current
    efilive calz file, this and 900+ rpm slip at lockup in third will break the tires loose!
    Click image for larger version. 

Name:	933sliplock.jpg 
Views:	1084 
Size:	145.8 KB 
ID:	15224
    Heck man if you want just send me that TCU file to Kory@LAtuning.com!

    I will test Monday!

    Thanks,
    Kory
    -Kory

    I'm out of ideas? Nah trick... When in doubt, 0xFFFF it out!

    http://www.PPEI.com/

  6. #6
    Lifetime Member
    Join Date
    Mar 2006
    Posts
    4,935

    Default

    This is going to be HUGE for the Allison guys...
    ~Erik~
    2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
    2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
    2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.

  7. #7
    Lifetime Member THEFERMANATOR's Avatar
    Join Date
    Mar 2009
    Posts
    800

    Default

    Quote Originally Posted by ScarabEpic22 View Post
    This is going to be HUGE for the Allison guys...
    I see alot fewer lockup boxes being sold. Now if somebody could find the torque converter unlock table at 0% throttle I would be alot happier. Having the converter unlock below 55 anytime I let off the throttle regardless of where I set the unlock table is rather annoying.
    1995 GMC 2500 SUBURBAN powered by 01 DURAMAX/ALLISON, little of this, a little of that,
    DIAMONDEYE 4" exhaust, CORSA muffler, AFE stage 1 dry filter, custom tuning by me, KENNEDY single pump and pump rub kit.

  8. #8
    Lifetime Member
    Join Date
    Jul 2012
    Posts
    289

    Default 600 rpm slip limit solved!!!! OS 25941752

    Quote Originally Posted by THEFERMANATOR View Post
    Having the converter unlock below 55 anytime I let off the throttle regardless of where I set the unlock table is rather annoying.
    Agreed 100%
    14 GMC Sierra
    5.3L CC SB 4x4
    Basic tuning....

  9. #9
    Lifetime Member
    Join Date
    Mar 2006
    Posts
    4,935

    Default

    Quote Originally Posted by THEFERMANATOR View Post
    I see alot fewer lockup boxes being sold. Now if somebody could find the torque converter unlock table at 0% throttle I would be alot happier. Having the converter unlock below 55 anytime I let off the throttle regardless of where I set the unlock table is rather annoying.
    Agreed, but it's a global truck issue. REALLY wish the T42s would have this table in truck OSs, not just car OSs.
    ~Erik~
    2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
    2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
    2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.

  10. #10
    Lifetime Member THEFERMANATOR's Avatar
    Join Date
    Mar 2009
    Posts
    800

    Default

    Quote Originally Posted by ScarabEpic22 View Post
    Agreed, but it's a global truck issue. REALLY wish the T42s would have this table in truck OSs, not just car OSs.
    I'm running the AL5, not a GM T42 TCM. The ALLISON TCM has ALOT of un-mapped parameters in it.
    1995 GMC 2500 SUBURBAN powered by 01 DURAMAX/ALLISON, little of this, a little of that,
    DIAMONDEYE 4" exhaust, CORSA muffler, AFE stage 1 dry filter, custom tuning by me, KENNEDY single pump and pump rub kit.

Page 1 of 14 12311 ... LastLast

Similar Threads

  1. 600 rpm slip limit
    By killerbee in forum Allison 5 & 6 Speed
    Replies: 14
    Last Post: December 2nd, 2012, 06:00 PM
  2. Fuel and RPM limit question...
    By LBZoom in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 1
    Last Post: June 2nd, 2010, 10:56 AM
  3. speed/RPM limit cancel!!
    By A.O.A in forum General (Petrol, Gas, Ethanol)
    Replies: 26
    Last Post: May 27th, 2009, 04:44 AM
  4. RPM limit
    By IdahoRob in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 91
    Last Post: November 7th, 2008, 04:41 PM
  5. High RPM power loss solved
    By PSWired in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 1
    Last Post: October 16th, 2005, 11:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •