Page 3 of 14 FirstFirst 1234513 ... LastLast
Results 21 to 30 of 138

Thread: 600 rpm slip limit solved!!!! OS 25941752

  1. #21
    Senior Member Quinton's Avatar
    Join Date
    Apr 2013
    Posts
    103

    Default 600 rpm slip limit solved!!!! OS 25941752

    Quote Originally Posted by Dmaxink View Post
    We have the 5 speed stuff working! 6 speed I have not tested, but pulling it out the reef here soon and mapping as many OS as possible. Have not been able to test the OP tune yet, but have it as well... Cool to see this brought back up to life!
    Nice! Can't wait to try it.
    [/SIGPIC]
    2005 duramax LLY, 12.75 on stock motor/fuel, 68mm vgt built trans.
    Built motor by me, built trans, EFIlive by me, dual fuelers, 80% injectors.

  2. #22
    Senior Member Quinton's Avatar
    Join Date
    Apr 2013
    Posts
    103

    Default 600 rpm slip limit solved!!!! OS 25941752

    Quote Originally Posted by Dmaxink View Post
    We have the 5 speed stuff working! 6 speed I have not tested, but pulling it out the reef here soon and mapping as many OS as possible. Have not been able to test the OP tune yet, but have it as well... Cool to see this brought back up to life!
    What tables are y'all editing for the 5 speeds?
    [/SIGPIC]
    2005 duramax LLY, 12.75 on stock motor/fuel, 68mm vgt built trans.
    Built motor by me, built trans, EFIlive by me, dual fuelers, 80% injectors.

  3. #23
    Lifetime Member Dmaxink's Avatar
    Join Date
    Nov 2009
    Posts
    1,176

    Default 600 rpm slip limit solved!!!! OS 25941752

    Hex!
    -Kory

    I'm out of ideas? Nah trick... When in doubt, 0xFFFF it out!

    http://www.PPEI.com/

  4. #24
    Junior Member
    Join Date
    Dec 2011
    Posts
    14

    Default

    Quote Originally Posted by Dmaxink View Post
    Hex!
    U still haven't answered me about that tune i sent u, did you try it or are you just reverse engineering my hard work? Dont really matter to me cause I have sent the addresses to Ross so he can include this variable in an update for all to be able to adjust. Cheers man!
    2007 Classic CCLB, LBZ - EFIlive, Custom 4 inch downpipe and exhaust, Stock trans with BD tripple disk shimmed relief and modded knockdown valve.
    35/12.50/17 Toyo Open country MT's
    1987 Toyota 4x4 8" lift, 35/13.5/15 Toyo open country's, Trail gear suspension, 22r turbo on Propane @ 20psi boost GT2860RS turbo, V6 R150 Transmission.

  5. #25
    Senior Member Quinton's Avatar
    Join Date
    Apr 2013
    Posts
    103

    Default 600 rpm slip limit solved!!!! OS 25941752

    Quote Originally Posted by mitchd View Post
    U still haven't answered me about that tune i sent u, did you try it or are you just reverse engineering my hard work? Dont really matter to me cause I have sent the addresses to Ross so he can include this variable in an update for all to be able to adjust. Cheers man!
    Awesome! When do you think it will be updated?
    [/SIGPIC]
    2005 duramax LLY, 12.75 on stock motor/fuel, 68mm vgt built trans.
    Built motor by me, built trans, EFIlive by me, dual fuelers, 80% injectors.

  6. #26
    Junior Member
    Join Date
    Dec 2011
    Posts
    14

    Default

    Quote Originally Posted by Quinton View Post
    Awesome! When do you think it will be updated?
    Ross said he would go through all the OS's and update the location and then post an update, he seemed pretty happy for me to give him the location so I would assume the update wont take long!
    2007 Classic CCLB, LBZ - EFIlive, Custom 4 inch downpipe and exhaust, Stock trans with BD tripple disk shimmed relief and modded knockdown valve.
    35/12.50/17 Toyo Open country MT's
    1987 Toyota 4x4 8" lift, 35/13.5/15 Toyo open country's, Trail gear suspension, 22r turbo on Propane @ 20psi boost GT2860RS turbo, V6 R150 Transmission.

  7. #27
    Senior Member Quinton's Avatar
    Join Date
    Apr 2013
    Posts
    103

    Default 600 rpm slip limit solved!!!! OS 25941752

    Quote Originally Posted by mitchd View Post
    Ross said he would go through all the OS's and update the location and then post an update, he seemed pretty happy for me to give him the location so I would assume the update wont take long!
    Awesome can't wait!
    [/SIGPIC]
    2005 duramax LLY, 12.75 on stock motor/fuel, 68mm vgt built trans.
    Built motor by me, built trans, EFIlive by me, dual fuelers, 80% injectors.

  8. #28
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Once again thanks to Mitch for sharing the work he did.
    Most importantly is I've found that we already have the table Mitch showed on he's first post included in the software, it's D5072, however, it was incorrectly defined as a 17 x 3 table, not 17 x 5 as Mitch has so we are not seeing the higher torque number axis points. But before I jump the gun here I need to check if it just so happened that an earlier OS had this as a 17 x 3 and only some have 17 x 5.

    Edit, the 5 speed had that table as 17 x 3 (assumption isn't always a good thing!).
    Last edited by GMPX; June 9th, 2013 at 09:44 AM.
    I no longer monitor the forum, please either post your question or create a support ticket.

  9. #29
    Senior Member
    Join Date
    Feb 2012
    Posts
    136

    Default

    I guess we can't rescale the torque axis? I know that would be to easy.

    Thnx

  10. #30
    Junior Member
    Join Date
    Dec 2011
    Posts
    14

    Default

    Quote Originally Posted by 30 RUM View Post
    I guess we can't rescale the torque axis? I know that would be to easy.

    Thnx
    dont really need to rescakw the axis, i just edit the other two colums.
    these should be in a future update for all .

    cheers
    2007 Classic CCLB, LBZ - EFIlive, Custom 4 inch downpipe and exhaust, Stock trans with BD tripple disk shimmed relief and modded knockdown valve.
    35/12.50/17 Toyo Open country MT's
    1987 Toyota 4x4 8" lift, 35/13.5/15 Toyo open country's, Trail gear suspension, 22r turbo on Propane @ 20psi boost GT2860RS turbo, V6 R150 Transmission.

Page 3 of 14 FirstFirst 1234513 ... LastLast

Similar Threads

  1. 600 rpm slip limit
    By killerbee in forum Allison 5 & 6 Speed
    Replies: 14
    Last Post: December 2nd, 2012, 06:00 PM
  2. Fuel and RPM limit question...
    By LBZoom in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 1
    Last Post: June 2nd, 2010, 10:56 AM
  3. speed/RPM limit cancel!!
    By A.O.A in forum General (Petrol, Gas, Ethanol)
    Replies: 26
    Last Post: May 27th, 2009, 04:44 AM
  4. RPM limit
    By IdahoRob in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 91
    Last Post: November 7th, 2008, 04:41 PM
  5. High RPM power loss solved
    By PSWired in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 1
    Last Post: October 16th, 2005, 11:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •