Page 1 of 3 123 LastLast
Results 1 to 10 of 26

Thread: new question for new beginner

  1. #1
    Member
    Join Date
    Jun 2013
    Posts
    73

    Default new question for new beginner

    Can anyone help me by telling me step by step instructions for connecting the LM-2 analog cable to plug into the V2 flash/scan. its the 3811 cable.

    Thanks in advance.

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,804

    Default

    If you have a V2, you should use serial comms...

    see post #3 here: serial-port-cable-that-goes-to-v2


  3. #3
    Member
    Join Date
    Jun 2013
    Posts
    73

    Default

    Thanks, I am talking about the actual wiring connectors that plug into the V2, I have the V2 already showing the wideband on the program but need to use the orange plugs and this is what/why I need help to make sure I use the correct wire colors to the correct location on the V2 from the LM-2.


    Quote Originally Posted by joecar View Post
    If you have a V2, you should use serial comms...

    see post #3 here: serial-port-cable-that-goes-to-v2

  4. #4
    Member
    Join Date
    Jun 2013
    Posts
    73

    Default

    Thanks but I am talking about the LM-2 WB wiring into the connectors that plug into the V2, I have the V2 already showing the wideband on the program but need to use the orange plugs and this is what/why I need help to make sure I use the correct wire colors to the correct location on the V2 from the LM-2.

  5. #5
    Lifetime Member
    Join Date
    May 2008
    Posts
    366

    Default

    Hi, welcome to the forum. I would recomend you use the serial port (Looks like a telephone jack) on the v2, not the analog connectors. You might need a different cable for the LM2
    E85 is NOT flex fuel.

    2003 Chevy S10 4.3L LU3 LS1B Auto
    48 LB injectors
    Race Proven Motors 2114 intake
    T70 turbo.

  6. #6
    Member
    Join Date
    Jun 2013
    Posts
    73

    Default

    The LM-2 does not have that cable option that i can see at least.

  7. #7
    Lifetime Member
    Join Date
    May 2008
    Posts
    366
    Last edited by nevinsb; June 1st, 2013 at 11:44 PM.
    E85 is NOT flex fuel.

    2003 Chevy S10 4.3L LU3 LS1B Auto
    48 LB injectors
    Race Proven Motors 2114 intake
    T70 turbo.

  8. #8
    Member
    Join Date
    Jun 2013
    Posts
    73

    Default

    do you know who else makes them, He hasnt posted since Dec. 2012, tried his home page and it doesnt open.

  9. #9
    Member
    Join Date
    Jun 2013
    Posts
    73

    Default

    can anyone help me with how to make one? I have a friend that could make one if we have the info I however am not the smart.

  10. #10
    Lifetime Member
    Join Date
    May 2008
    Posts
    366

    Default

    http://forum.efilive.com/showthread....2-Serial-Cable

    Should be all the information your friend will need to make one.
    E85 is NOT flex fuel.

    2003 Chevy S10 4.3L LU3 LS1B Auto
    48 LB injectors
    Race Proven Motors 2114 intake
    T70 turbo.

Page 1 of 3 123 LastLast

Similar Threads

  1. Basic beginner needing some direction
    By CRud09 in forum Tips and tricks
    Replies: 3
    Last Post: May 22nd, 2013, 01:56 AM
  2. anything for an 09 V6? EFI live beginner...
    By dieselsmith in forum Gen III V8 Specific
    Replies: 2
    Last Post: January 30th, 2010, 03:05 PM
  3. beginner / need help
    By sharpshooter in forum FlashScan V2
    Replies: 2
    Last Post: December 3rd, 2009, 05:44 AM
  4. Beginner question re: 2003 LM7 5.3 Vortec
    By Jon95YJ in forum Gen III V8 Specific
    Replies: 9
    Last Post: November 6th, 2008, 05:23 AM
  5. beginner question
    By redls1bird in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: January 10th, 2006, 03:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •