Page 3 of 10 FirstFirst 12345 ... LastLast
Results 21 to 30 of 98

Thread: Update: June 06, 2013

  1. #21
    Lifetime Member minytrker's Avatar
    Join Date
    Jan 2006
    Posts
    1,332

    Default

    Quote Originally Posted by Brads_rs View Post
    Just installed the updated version of both V7.5 and V8. V8 works fine. The tuning software however does not. Program locks up when starting up (detecting V2 flash scan). If i unplug the V2 the software starts up just fine, only freezes when i have the v2 connected. I tried reinstalling several times, with no luck. V2 has updated firmware and boot block. USB drivers are current. I have to be overlooking something. Please help
    Same thing Here

    Quote Originally Posted by Blacky View Post
    If you're having USB issues, the best thing to do would be to explain the issues either here in this thread or directly to me at paul@efilive.com, and I'll try and figure out the problem and how to fix it.

    Regards
    Paul
    Having same issue as others in this post

    Quote Originally Posted by joecar View Post
    Which driver are you using...?
    The newest one from the update

    Quote Originally Posted by 2007 5.9 View Post
    THIS!!!!

    I cant close scantool after a run without unplugging the V2...
    Same here

  2. #22
    Lifetime Member EagleMark's Avatar
    Join Date
    Dec 2010
    Posts
    466

    Default

    Quote Originally Posted by Blacky View Post

    The auto-update feature is also now active so you can now update from recent builds as explained on the downloads web page.

    Regars
    Paul
    Is there any way to assure and Auto Update does not happen to V7.5.7 build 211 ?

  3. #23
    Member
    Join Date
    Feb 2008
    Posts
    69

    Default

    I am using the newest driver 2.08.28. It is the only one that the software will allow me to use with the new version of V7. Has anyone figured this out yet? I have a car sitting on the dyno, that needs to get done asap.

  4. #24
    Lifetime Member IdahoRob's Avatar
    Join Date
    Apr 2006
    Posts
    736

    Default

    This went public?
    2013 LML, 550hp with factory emissions, stock cp4 and compound turbos.
    2002 LBZ, 4x4 (Max'd Out) 6000lbs 9.36 @ 154 mph NHRDA Champion and Record holder
    1965 El Camino, duramax 9.6 @ 149MPH

    All EFI tuned by Adrenaline Truck Performance

  5. #25
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    Quote Originally Posted by EagleMark View Post
    Is there any way to assure and Auto Update does not happen to V7.5.7 build 211 ?
    Auto-update does not mean the software will update by itself.
    It just means when you select the "Check for Updates" option the software can be updated automatically without downloading the entire installation.
    If you don't want to update, just don't select the "Check for Updates" option.

    Regards
    Paul
    Before asking for help, please read this.

  6. #26
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    For anybody experiencing USB connectivity issues, please see this thread:
    http://forum.efilive.com/showthread....066#post193066

    Regards
    Paul
    Before asking for help, please read this.

  7. #27
    Lifetime Member comnrailpwr's Avatar
    Join Date
    Jun 2011
    Posts
    456

    Default Re: Update: June 06, 2013

    Quote Originally Posted by 2007 5.9 View Post
    THIS!!!!

    I cant close scantool after a run without unplugging the V2...
    Same problem here but with all these issues I'm still on the previous software release. I have had this issue since day one. Also 7.5 tunetool hangs when opening up a file while v2 is pluged in.

  8. #28
    Lifetime Member 2007 5.9's Avatar
    Join Date
    Nov 2010
    Posts
    1,835

    Default

    No different...still hangs with V2 plugged in.
    Les Szmidt
    2007 5.9 Dodge Ram
    2014 Ram 3500 Aisin tuning Emissions Equipped
    EFI Live Cummins BETA Tester
    Silver Bullet Tuning
    silverbullettuning@gmail.com
    www.youtube.com/ljszmidt
    http://www.facebook.com/SilverBulletTuninig

  9. #29
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    Quote Originally Posted by 2007 5.9 View Post
    No different...still hangs with V2 plugged in.
    Do you have access to powered USB hub? One that has a wall-plug power connection? If so can you try hooking up FlashScan via the powered USB hub?

    There are some PC's laptops that have implemented their USB interfaces with a problem that causes the USB interface to hang if/when too much electrical noise is on the USB bus. Placing a hub between FlashScan and the PC/laptop usually resolves the issue.
    If you don't have a powered USB hub, can you try FlashScan in each of the USB ports on your system? Some USB ports are physically wired to different USB hubs within the PC/laptop and some of those internal hubs behave differently.

    Regards
    Paul
    Before asking for help, please read this.

  10. #30
    Lifetime Member 2007 5.9's Avatar
    Join Date
    Nov 2010
    Posts
    1,835

    Default Update: June 06, 2013

    I've moved it between all of the 3- I have on my laptop.

    No powered hub around. I am buying a new laptop this weekend, so hopefully it'll work with that.

    All this started with the last 2-updates....

    Never an issue before, and I haven't had to do a W7 update in a while.
    Les Szmidt
    2007 5.9 Dodge Ram
    2014 Ram 3500 Aisin tuning Emissions Equipped
    EFI Live Cummins BETA Tester
    Silver Bullet Tuning
    silverbullettuning@gmail.com
    www.youtube.com/ljszmidt
    http://www.facebook.com/SilverBulletTuninig

Page 3 of 10 FirstFirst 12345 ... LastLast

Similar Threads

  1. Update: May 25, 2013
    By Blacky in forum Software Updates and Installation Help
    Replies: 52
    Last Post: June 11th, 2013, 04:28 PM
  2. Update: June 05, 2013
    By Blacky in forum Software Updates and Installation Help
    Replies: 4
    Last Post: June 5th, 2013, 03:26 PM
  3. Update: May 20, 2013
    By Blacky in forum Software Updates and Installation Help
    Replies: 49
    Last Post: May 24th, 2013, 03:25 PM
  4. Update: May 15, 2013
    By Blacky in forum Software Updates and Installation Help
    Replies: 43
    Last Post: May 22nd, 2013, 06:01 AM
  5. June V2 update
    By jfpilla in forum E37, E38 & E67 PFI ECM's
    Replies: 9
    Last Post: August 13th, 2007, 10:09 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •