Results 1 to 8 of 8

Thread: VX Commodore LS1 Tunes?

  1. #1
    Lifetime Member oztracktuning's Avatar
    Join Date
    Nov 2005
    Posts
    596

    Default VX Commodore LS1 Tunes?

    Its meant to say VZ!!


    Does anyone the stock VZ LS1 calibrations they can share with me? Interested to see what the differences are.
    Last edited by oztracktuning; April 1st, 2006 at 01:54 PM.

  2. #2
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    Just added these to my tune repository for ya

    They are a 1MB PCM and therefore a different OS # so you won't be able "compare" directly with EFILive :(
    Andrew
    EFILive Crew


  3. #3
    Lifetime Member oztracktuning's Avatar
    Join Date
    Nov 2005
    Posts
    596

    Default Thanks

    Thats great service. Thanks.
    They look good - much improved timing.

    Do the SS tunes or any of the other LS1 VZ tunes vary from these at all??

  4. #4
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    These are the only ones I've got sorry so I can't tell ya. Like you say timing table definitely looks better.
    Andrew
    EFILive Crew


  5. #5
    EFILive Reseller ringram's Avatar
    Join Date
    Oct 2005
    Posts
    1,411

    Default

    That is excellent, PE is interesting as well as the VE looking more like what I thought it should. Though maybe a little beefy down low.
    Looks like the extra size has quite a bit to do with ethanol management.
    IFR seems to be more linear as well, values are different too.
    Interesting O2 switchpoints..
    Spark map has the 4000 rpm dip, which as flyer says is well interesting. I found the same through experience, you have to drop spark at peak TQ.
    Very good. Lots of good info in that stock tune.
    Get EFILive in europe (http://www.efilive.eu).
    2007 Escalade ESV L92 6.2L VVT.
    2014 VF SV LS3 Maloo.

  6. #6
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    From what I hear the VZ VE table is pretty good, go mafless and it runs pretty close to the AFR's it should.
    Perhaps Holden used the BEN factor

    Cheers,
    Ross
    I no longer monitor the forum, please either post your question or create a support ticket.

  7. #7
    Lifetime Member oztracktuning's Avatar
    Join Date
    Nov 2005
    Posts
    596

    Default

    The VZ VE table - isnt suitable for a VY is it? Do they have a different TB or MAF size?

    Should we drop spark at peak torque or peak g/cylinder? I found out last week my peak torque 5100rpm is a little earlier than my peak g/cylinder 5400rpm??

    I will start this in another thread.

  8. #8
    EFILive Reseller ringram's Avatar
    Join Date
    Oct 2005
    Posts
    1,411

    Default

    Thats interesting. In theory Id have thought peak g/cyl is peak tq, especially if its burning all the fuel optimally. Are you sure your fuel and timing is 100% at peak g/cyl?
    Get EFILive in europe (http://www.efilive.eu).
    2007 Escalade ESV L92 6.2L VVT.
    2014 VF SV LS3 Maloo.

Similar Threads

  1. Converting DSP2 tunes to DSP5 Tunes
    By BlkMax in forum Duramax LB7
    Replies: 4
    Last Post: March 6th, 2009, 09:14 AM
  2. VX and VY commodore
    By Thumper in forum Gen III V8 Specific
    Replies: 1
    Last Post: February 8th, 2009, 10:48 AM
  3. Commodore tunes
    By FatVYute in forum Gen III V8 Specific
    Replies: 5
    Last Post: July 20th, 2008, 07:14 AM
  4. Commodore vx II V6 on LPG
    By Mike :) in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: May 19th, 2006, 10:17 PM
  5. Would unlocked tunes encourage you to pay for more tunes?
    By ringram in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: November 11th, 2005, 12:09 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •