Results 1 to 2 of 2

Thread: e38 6.2L conversion from 5.3L timing bounce in park only not drive XXX

  1. #1

    Question e38 6.2L conversion from 5.3L timing bounce in park only not drive XXX

    Hi all Dayton MN here,, needing help on tuning question this client installed a 6.2L and it had cam upgrade, at idle the timing bounces like a big cam but in gear it idles normal no bounce.... where is there a setting in the software to smoothe this out at idle in park/ neutral ?? or does any one have a 6.2L file i can compair with? thank you in advance

  2. #2
    Lifetime Member swingtan's Avatar
    Join Date
    Jul 2007
    Posts
    1,589

    Default

    Doest the engine have an idle hunt when in neutral?

    I'd have guessed tha tthe neutral idle air flow was too low, causing a hunt that then results in excessive spark timing corrections. Putting it in gear adds more air flow and the increased engine load tends to calm down the idle.

    Post a log of the issue making sure you include airflow, RPM, ETCTPS and spark. Fuel trims would also be good.

    Simon

Similar Threads

  1. E38 Conversion questions.
    By LS1Inferno in forum E37, E38 & E67 PFI ECM's
    Replies: 4
    Last Post: April 17th, 2013, 05:08 AM
  2. 0411/E38 Conversion ?
    By 3fingas in forum Gen IV V8 Specific
    Replies: 3
    Last Post: May 20th, 2012, 01:05 PM
  3. Park to drive question
    By driver456 in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: May 15th, 2009, 08:40 AM
  4. timing map conversion
    By wingnut in forum General
    Replies: 2
    Last Post: April 29th, 2009, 08:36 AM
  5. Park to drive
    By driver456 in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: October 1st, 2006, 09:27 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •