Results 1 to 4 of 4

Thread: LS2 402 lean idle

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. April 2nd, 2006 #1
    white2000ta
    white2000ta is offline
    Junior Member
    Join Date
    Jan 2004
    Posts
    10

    Default LS2 402 lean idle

    How much overlap is too much to tune using factory sensors in closed loop? Idle AFR is ~ 18:1 on wideband. MAP reads ~65kpa at idle. Cam has about ~20* of overlap.

    AFR225 heads, LSX intake, 90mm TB, 1 7/8 headers w/ 3" duals and an H-pipe.

    Here is a link to a log setup for autove. www.fast-ta.com/tune/402/misc/autove.efi
    Last edited by white2000ta; April 2nd, 2006 at 05:04 AM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. WB showing way lean @ idle
    By Afterhours Performance in forum Gen III V8 Specific
    Replies: 7
    Last Post: November 29th, 2009, 05:39 AM
  2. can a lean idle or going lean during light cruise harm the engine?
    By ryans1000 in forum General (Petrol, Gas, Ethanol)
    Replies: 10
    Last Post: November 3rd, 2009, 01:44 PM
  3. Running Lean at Idle
    By mikeyayell in forum Gen III V8 Specific
    Replies: 14
    Last Post: December 28th, 2007, 07:55 AM
  4. Very lean at idle RPM/MAP problem
    By jnorris in forum General (Petrol, Gas, Ethanol)
    Replies: 111
    Last Post: February 17th, 2006, 10:29 AM
  5. Lean idle?
    By Texas Terminator in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: February 2nd, 2006, 10:06 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules