Is it possible to use TPS VE solely for idle fueling? I am having difficulty leaning out my idle cells in the main VE and wanted to try to tune fueling for idle in A0007. Must I populate the entire table for this or just the cells I plan on using within in the set parameters? Best lean idle is at 12.3 on e85.
All PE is set to lambda 1.01 through 3600/ 0.86 through 8000
B3647 set to 1.01
No IAC
No NB 02's ( LC1's on both banks)
Idle spark 17-26*
Cam 250/260 .671"
Idle VE at 95kpa
Thanks in advance for any input.