Results 1 to 1 of 1

Thread: LS1 cam 90mm throttle idle issues :(

  1. #1
    Junior Member
    Join Date
    Sep 2011
    Posts
    29

    Default LS1 cam 90mm throttle idle issues :(

    I'm having some lingering issues that I'm yanking my hair out over. I'm hoping you guys can shed some light on things to try for me. I've read and implemented all the idle tuning procedures listed on here. I've spent hours reading. I've spent even more time playing with changes to see their impact on idle as well. Here are specifics around the vehicle:

    * 2003 Corvette ZO6
    * stock bottom end
    * mild camshaft
    * AFR heads
    * Fast 92 intake manifold
    * LS2 90mm throttle body


    Here are symptoms of the issue I'm struggling with:
    * car idles perfectly fine
    * when coming to a stop, periodically drops past idle and dies
    * no real correlation to stalling based on previous RPM...but somewhere around 2500-3200...normal driving


    I'll attach my tune below, but this is just driving me crazy. Any further suggestions to try? I've tried just about everything based on the many idle threads on here. Anything glaring that I'm just overlooking because I've been staring at it so long?

    Thanks guys!
    Attached Files Attached Files

Similar Threads

  1. '07 5.3(LMG) 90mm LS3 throttle body
    By InTruckDesign in forum E37, E38 & E67 PFI ECM's
    Replies: 2
    Last Post: July 26th, 2011, 02:01 AM
  2. Replies: 0
    Last Post: August 12th, 2010, 06:09 PM
  3. 98 cam only minor idle issues (log inside) HELP
    By bad6as in forum Gen III V8 Specific
    Replies: 0
    Last Post: April 9th, 2009, 10:56 AM
  4. crazy idle cam only Ls1
    By Ls1_Rulz in forum Gen III V8 Specific
    Replies: 6
    Last Post: February 26th, 2008, 06:25 AM
  5. Throttle area conversion from 78mm to 90mm.
    By PRAY in forum Gen III V8 Specific
    Replies: 5
    Last Post: January 23rd, 2008, 01:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •