Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 24

Thread: Need a high idle enabled stock file for a 2006 w/automatic transmission OS:11352602

  1. #11
    Member Motorzane's Avatar
    Join Date
    Jun 2011
    Posts
    96

    Default Need a high idle enabled stock file for a 2006 w/automatic transmission OS:1135

    Quote Originally Posted by 2007 5.9 View Post
    High idle is TIPM controlled NOT ecm.

    So you wont have it.

    Scott email me and Ill get you a OS with high idle enabled
    The PTO high idle is controlled by the PCM. I turn it off or on through the PCM part of the Witech scan tool. And the wire that is grounded to make that happen comes out of the PCM.

  2. #12
    Junior Member
    Join Date
    Jul 2013
    Posts
    12

    Default

    This is my first post on the forum so I hope I'm not asking too much, could someone send me a hi idle stock tune for 35325553? I loaded a tune that was sent to me on my truck as I couldn't read my stock one kept giving me the $11 error.. hope I didn't mess up doing that before I saved a stock tune! Sure is a steep learning curve gettin setup with efi live but is very hard to stay away from it now. Could someone help me out? the truck is 06
    Last edited by TravelinCummins; July 20th, 2013 at 08:40 AM.

  3. #13
    Junior Member SCason's Avatar
    Join Date
    Feb 2013
    Posts
    13

    Default

    Check with Les to be sure, but I think the file he posted for me will work the same for you. It worked great on mine...

  4. #14
    Junior Member
    Join Date
    Jul 2013
    Posts
    12

    Default

    Okay didn't know how different the calibrations are, thanks!

  5. #15
    Junior Member SCason's Avatar
    Join Date
    Feb 2013
    Posts
    13

    Default Re: Need a high idle enabled stock file for a 2006 w/automatic transmission

    Be sure to change the VIN!!!

  6. #16

    Default

    I have the same truck, how do I attach the file for you?
    To Live, To Serve...

  7. #17
    Senior Member
    Join Date
    Nov 2015
    Posts
    116

    Default

    To bring up this old thread, Les is that file one of the good latest OS? Like I see some issues some 2006s had that apparently got fixed through time with new flashes from dealer. Is this a good one?


    Sent from my iPhone using Tapatalk

  8. #18
    Senior Member
    Join Date
    Nov 2015
    Posts
    116

    Default

    Well I found out the hard way that 2007 file listed above does not run on my 2006. Changed it to match my other OS tune identically and it wont run para chit.

  9. #19
    Lifetime Member 2007 5.9's Avatar
    Join Date
    Nov 2010
    Posts
    1,835

    Default

    As long as it's the same trans file, any 2006-2007 5.9 file can be used in any cmb849 ecm.
    Les Szmidt
    2007 5.9 Dodge Ram
    2014 Ram 3500 Aisin tuning Emissions Equipped
    EFI Live Cummins BETA Tester
    Silver Bullet Tuning
    silverbullettuning@gmail.com
    www.youtube.com/ljszmidt
    http://www.facebook.com/SilverBulletTuninig

  10. #20
    Lifetime Member 2007 5.9's Avatar
    Join Date
    Nov 2010
    Posts
    1,835

    Default

    Now there are some OS with different scaling, and that's likely your issue.
    Les Szmidt
    2007 5.9 Dodge Ram
    2014 Ram 3500 Aisin tuning Emissions Equipped
    EFI Live Cummins BETA Tester
    Silver Bullet Tuning
    silverbullettuning@gmail.com
    www.youtube.com/ljszmidt
    http://www.facebook.com/SilverBulletTuninig

Page 2 of 3 FirstFirst 123 LastLast

Similar Threads

  1. Any Body have the stock file for this OS# 12605732 for 2006 C6 A6
    By wesam in forum E37, E38 & E67 PFI ECM's
    Replies: 3
    Last Post: June 19th, 2012, 08:30 AM
  2. Need 2006 SSR M6 stock file
    By Xman in forum Gen IV V8 Specific
    Replies: 5
    Last Post: September 10th, 2010, 01:35 AM
  3. I need stock file of vette c6 2006 12614682
    By odd boy in forum Petrol / Gas
    Replies: 1
    Last Post: July 28th, 2010, 01:04 AM
  4. Supercharged without automatic transmission tuning.
    By scdyne in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 0
    Last Post: January 16th, 2010, 09:06 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •