I installed a PLX300,I put the O2 sensor in the X pipe right in the X part,Is that to far back?. Could I have cut a wire maybe? I get a reading of 14.6,But it just flickers from 14.67 to 14.68 or 14.69 no matter how much gas I give it.
I installed a PLX300,I put the O2 sensor in the X pipe right in the X part,Is that to far back?. Could I have cut a wire maybe? I get a reading of 14.6,But it just flickers from 14.67 to 14.68 or 14.69 no matter how much gas I give it.
Don't start your car, just turn the key to run position, after several minutes you should see a lean condition or air. If you want to speed the process hook a vacuum cleaner to your tailpipe.
The X pipe may be too far back to get a timely reading, but it should be accurate.
The 14.xx is as it should be except for cold starts and WOT.
Y2K C5, M6, LS6 intake, Kooks LT headers, High flow cats, 216/224 113 LSA, 5.3 Stage II heads. STS twins. COS