Autocal Error $06FF

[Mike@Vengeance]

Sent one of these out to a customer and he downloaded the file and sent it to me. I modified the tune and sent it back. He tried to load and got the $06FF error and now the car will not start.

Any ideas? I have been over his setup with him over the phone and everythings seems correct.

Do I need to send the file in to EFI Live to have it look at?

Any help would be great.

Thanks

[Mike@Vengeance]

Also does anyone know where is 8.1 my autocal secruity settings are. I hate not being able to open up my own autocal files later.

Thanks

[cindy@efilive]

What vehicle are you trying to program? From the error codes list you have a checksum failure.

As for security options....Open the tune file with V8 and select the [F4: Properties] tab page. Expand the [Security Restrictions] section.

1. Enter the device's license number and/or;
2. Enter the device's serial number and/or;
3. Enter the controller's serial number.

If you enter a device license number, then all devices that have that license number can flash that tune file into any/all vehicle controllers. Use this option to create files that you can send to all your customer's with linked AutoCal's.

If you enter a device serial number, then only the single device that has that serial number can flash that tune file into any/all vehicle controllers. Use this option to send a tune that can only be flashed by one of your customers.

If you enter a controller serial number, then any device (that passes restrictions 1 and 2) can flash that tune file only into the controller with that serial number. Use this option to restrict the tune file to only being flashed into a single vehicle.

So to prevent anyone other than the original purchaser flashing a tune file into their truck, simply add the truck's controller's serial number into the [Security Restrictions] section.

Cheers
Cindy

[Mike@Vengeance]

On my desk I was able to read the file with the autocal and move it over in Explorer. I made a quick change nothing major and loaded that back in the tune section of the autocal.

Tried to Full Fash and no luck Error $06FF. Any Ideas how I can make it work. I have never seen this before???

[GMPX]

What vehicle / ECM type is it?
The error code you are getting sounds like something on the vehicle is messing up the reflash process.

[Mike@Vengeance]

2012 E38 C6

Problem is the coputer and autocal are on my desk now. So no car to mess with it.

[Mike@Vengeance]

Okay tried everything agian. No Luck

Could I have bad autocal or is that possible. I tried some COZ files for cal only flash and no luck same thing.

[Mike@Vengeance]

Here are some tunes if anybody at EFI LIVE can take a look.1st TUNE Mark D.ctz2012 C6 Auto cal test.tun

[cindy@efilive]

What after market devices are on the vehicle? As Ross said above, it sounds like something on the vehicle is interrupting the flash. iPod adaptors, GPS, Radio, alarm?

Cheers
Cindy

[Mike@Vengeance]

Problem is the PCM is not in the car

It's on my desk with a bench harness