CSP-5 Video walkthrough

[2007 5.9]

Here are some videos I made today to hopefully help you guys go from A-Z in moving, flashing, switching and looging with CSP-5/EDA.

http://s472.photobucket.com/user/200...40264.mp4.html

http://s472.photobucket.com/user/200...9D80B.mp4.html

http://s472.photobucket.com/user/200...765F1.mp4.html

http://s472.photobucket.com/user/200...0298B.mp4.html

http://s472.photobucket.com/user/200...2E540.mp4.html

http://s472.photobucket.com/user/200...9F92F.mp4.html

[GMPX]

Nice one Les, hopefully this helps those who might be a bit lost.

[2007 5.9]

I'm getting emails everyday from those who dont want to read...so visual guidance seemed necessary.

[GMPX]

I'm not much of a 'read the manual' guy myself so I won't rant, but I know what you mean.

[cumminsDK]

hey Les,

I figured out my tune naming issue with the names changing, if I go in and select the CMB PID list in the V2 then it comes up with the correct programmed names. However I noticed in your second to last video that you were changing units on the v2 by pressing enter while displaying data. Mine will not do this. I have tried everything I can think of. it will however change to 4 pids displayed (control+enter) and the white background (control+down arrow). Any suggestions?

Thanks in advance,
Trent

[2007 5.9]

hey Les,

I figured out my tune naming issue with the names changing, if I go in and select the CMB PID list in the V2 then it comes up with the correct programmed names. However I noticed in your second to last video that you were changing units on the v2 by pressing enter while displaying data. Mine will not do this. I have tried everything I can think of. it will however change to 4 pids displayed (control+enter) and the white background (control+down arrow). Any suggestions?

Thanks in advance,
Trent

You have to change the units in the bbl section in v8...then reprogram the v2


Sent from my iPhone using Tapatalk 2

[cumminsDK]

Ok got the units changing had to go into each pid and in properties activate custom units the select the imperial unit I wanted to see, but now all units converted from kpa to psi read zero when displaying psi. They work as before when I hit enter and they are displayed in kpa. Sorry to be a nuisance but this is my first adventure into BBX. I do feel like I've come a long way in the last twelve days as I have been able to read, flash, log, and switch tunes with the v2 its just the units thing kicking my butt!

[2007 5.9]

After you changed the units, did you save and reprogram the v2?


Sent from my iPhone using Tapatalk 2

[cumminsDK]

I believe so I've done it so many times I can't be sure but if I hadn't the units wouldn't be changing when I hit enter I'm thinking??

[2007 5.9]

Corrxt


Sent from my iPhone using Tapatalk 2