Results 1 to 6 of 6

Thread: licensed controller says it not??

  1. #1
    Junior Member
    Join Date
    Jul 2013
    Posts
    14

    Default licensed controller says it not??

    i licenced a controller for a 2004 and 9044 os ,,, changed to a 6006 os and tryed to make a change and now efi says controller not licensed with a $0534 message?? any ideas what i did,,, pritty sure i didnt lock it

  2. #2
    Lifetime Member
    Join Date
    Nov 2005
    Posts
    1,753

    Default

    From the Error Code list

    $0534 Invalid Serial Number.

    An attempt was made to program and license a controller that had a corrupt serial number.

    It is possible for the serial number to appear corrupt due to a data transfer failure. Retry the operation a few times, if the error continues to occur then the serial number probably is corrupt. In that case, use the EFILive Tuning Tool software to full-flash the controller to restore the serial number.


    What serial number appears?

    Cheers
    Cindy

  3. #3
    Junior Member
    Join Date
    Jul 2013
    Posts
    14

    Default

    tried it a couple more time and it says the same thing ,,, the number it says is 3280ct09bcp1

  4. #4
    Lifetime Member
    Join Date
    Nov 2005
    Posts
    1,753

    Default

    I've escalated your issue to support.

    Cheers
    Cindy

  5. #5
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    Make sure you are using the latest EFILive software, available here:
    http://forum.efilive.com/showthread....te-Aug-06-2013

    Then if the problem still occurs, please locate the appropriate trace files as per the instructions here:
    http://support.efilive.com/kb_articl...8254-QOGC-9586

    Send the trace files to me at paul@efilive.com

    Regards
    Paul
    Before asking for help, please read this.

  6. #6
    Junior Member
    Join Date
    Jul 2013
    Posts
    14

    Default

    that did it guys ,,,thanks a bunch!

Similar Threads

  1. Replies: 4
    Last Post: January 3rd, 2013, 07:15 PM
  2. Licensed ECM can be retune with another v2???
    By 400ss in forum Gen III V8 Specific
    Replies: 7
    Last Post: May 30th, 2012, 04:27 AM
  3. Replies: 4
    Last Post: September 10th, 2010, 12:38 PM
  4. help needed...pcm asking to be licensed again
    By steve40 in forum General
    Replies: 7
    Last Post: June 16th, 2010, 12:51 PM
  5. Licensed PCM now unlicensed?
    By PSWired in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: October 8th, 2005, 07:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •