Results 1 to 2 of 2

Thread: 06 silverado turbo tuning

  1. #1
    New Member
    Join Date
    Jul 2013
    Posts
    5

    Default 06 silverado turbo tuning

    Hello everyone, Im new to the forum and im trying to get info on tuning my custom built turbo, a friend owns the efi live, but was having issues getting the cos to load, unfortunately I just read that there is no cos for the 2006+. So here is what im running mabe someone can help, Its a 2006 silverado 4.8l, 5 speed, custom built forward mount turbo, gm4 turbo, intercooled, spec stage 3 clutch, dura grip posi. Im getting 2.5 psi up to 3000 rpm, and 5-6 psi over that on stock tune, afr is reading pretty good, however my 1/4 mile times havent increased. Can i tune in a 2 bar maf without the cos? where else should we start? or should I rip this all out and go all motor? Thanks for your help.

  2. #2
    Member
    Join Date
    Aug 2008
    Posts
    59

    Default

    Here is what i did for a customers 06 i did a front mount turbo on. Like you said there is not COS for and 06. I took an 04 TAC module and Throttle pedal and swapped it into the 06 then took an 04 OS and flashed it into the 06 PCM. Works great, no issues. I now can use COS with my 3 bar map. I got lucky and picked up the TAC module and Throttle pedal from a local junk yard for $150

Similar Threads

  1. 04 Silverado turbo 6.0 help.
    By Janke in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 35
    Last Post: March 1st, 2011, 10:56 AM
  2. 2006 Silverado Turbo. . Really need a COS.
    By hotrod in forum Custom Operating Systems
    Replies: 1
    Last Post: January 25th, 2011, 12:54 PM
  3. 04 Silverado SS tuning
    By bentley429 in forum Gen III V8 Specific
    Replies: 3
    Last Post: January 24th, 2010, 07:14 PM
  4. 08 Silverado 5.3 Tuning, tuning-spark/pe mode/
    By hulm333 in forum Gen IV V8 Specific
    Replies: 1
    Last Post: November 16th, 2009, 04:44 PM
  5. turbo 5.3 silverado tuning
    By kostelacd69 in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: March 2nd, 2009, 08:01 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •