Results 1 to 5 of 5

Thread: FlashScan devices reporting Error $0101 "No Data received"

  1. #1
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,143

    Default FlashScan devices reporting Error $0101 "No Data received"

    Some customers have reported FlashScan devices that are showing "No Data Received" errors when attempting to flash a controller or to reprogram FlashScan's firmware.
    We have reproduced the problem here at EFILive on a set of test devices. We are still working to try and discover the cause of the fault. As soon as we do we will post an update in this thread.

    Regards
    Paul
    Before asking for help, please read this.

  2. #2
    Junior Member Always2Slow's Avatar
    Join Date
    Jan 2013
    Posts
    30

    Default

    Quote Originally Posted by Blacky View Post
    Some customers have reported FlashScan devices that are showing "No Data Received" errors when attempting to flash a controller or to reprogram FlashScan's firmware.
    We have reproduced the problem here at EFILive on a set of test devices. We are still working to try and discover the cause of the fault. As soon as we do we will post an update in this thread.

    Regards
    Paul
    I can add to this post as of right now. I have received many of the errors posted in the last few weeks with regard to windows 8 laptops and updating firmware and the bootblock. I have recieved them all. Took me maybe 6 tries to get the flash scan to fully take the firmware without freezing up. I can tell you this all the software runs perfect long as the v2 is not hooked up. Soon as you hook it up things act wierd and start to freeze or become unresponsive. At this moment things seem to work fine and I will see how scanning and logging goes with a LS1B ECM. Hope you get this resolved soon. EFI Live is the best.
    2000 Camaro m6 Full Bolt ons in need of a H/C/I

  3. #3
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,143

    Default

    Yesterday we managed to identify the cause of the two issues that have been reported over the past few months. The first issue was the $0101 error that interrupts FlashScan firmware programming and reading/flashing controllers. Plus we've finally identified the cause of the V7 software hanging when V2 is connected. Patches for both issues have been developed and are being tested right now. We plan to release an update that provides solutions to both of these problems early next week.

    Regards
    Paul
    Before asking for help, please read this.

  4. #4
    Junior Member
    Join Date
    Sep 2013
    Posts
    18

    Default

    Quote Originally Posted by Blacky View Post
    Yesterday we managed to identify the cause of the two issues that have been reported over the past few months. The first issue was the $0101 error that interrupts FlashScan firmware programming and reading/flashing controllers. Plus we've finally identified the cause of the V7 software hanging when V2 is connected. Patches for both issues have been developed and are being tested right now. We plan to release an update that provides solutions to both of these problems early next week.

    Regards
    Paul
    hi i purchased EFI live flash scan v2 from oz track tuning australia i am getting this error $0101 i currently have my car not starting or able read or tune the ECU E39 model due to it didnt flash all the way first time

    i need this patch emailed to me ASAP please scootersonlyaus@gmail.com

  5. #5
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    Download and install the Software and Firmware from this thread.
    Andrew
    EFILive Crew


Similar Threads

  1. Autocal Read Error $0101 No data received
    By firehawk in forum AutoCal
    Replies: 2
    Last Post: April 14th, 2013, 10:36 PM
  2. "File Sys FULL!" followed by "ERROR: $0520"
    By Sushisan in forum AutoCal
    Replies: 2
    Last Post: April 24th, 2012, 06:35 AM
  3. Help "No Data Received" error
    By lhoran90 in forum Duramax LB7
    Replies: 3
    Last Post: January 25th, 2012, 03:56 PM
  4. "No Data Received" error
    By lhoran90 in forum Duramax LB7
    Replies: 0
    Last Post: January 24th, 2012, 04:08 PM
  5. 98 pcm reporting "not ready" at emission testing.
    By ChucksZ06 in forum Gen III V8 Specific
    Replies: 4
    Last Post: May 7th, 2009, 01:52 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •