Results 1 to 3 of 3

Thread: Any help on adjusting timing correctly?

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member TorqueMonster007's Avatar
    Join Date
    Aug 2013
    Posts
    83

    Default Any help on adjusting timing correctly?

    I believe im pretty much where I wanted to be but wanted to check on a few things. I believe im running a little rich and not sure if the timing is exactly on? believe its commanded at 25* at the moment but pulling only 22 on the log file. Attached is the tune file. can some one tell me if I can get any more out of this thing safely with possibly different fueling or timing? also, the 1-2 shift is fine but feeling like with the 6l80e I need to wind it out a little more for the 2-3 shift? comments and help would be appreciated.

    ***Note**** I will be spraying it with a 100-150 wet plate, but only after dyno and wideband observed.
    Attached Files Attached Files
    2024 3500HD (SRW) Duramax Denali Reserve
    2021 Ram 4500 Limited (Horse Hauler)
    2016 LML 2500HD Duramax High Country with a little help
    2022 Yukon Denali

Similar Threads

  1. v2 not logging pids correctly?
    By bierworthmotorsports in forum General
    Replies: 7
    Last Post: September 23rd, 2012, 06:43 AM
  2. Why Won't it Start Correctly??
    By onegonewild in forum Gen III V8 Specific
    Replies: 9
    Last Post: September 19th, 2011, 07:23 AM
  3. Analog voltage not recording correctly
    By SweetS10V8 in forum General
    Replies: 8
    Last Post: December 29th, 2009, 04:07 PM
  4. did i do this correctly?
    By hhorton in forum External A/D inputs
    Replies: 9
    Last Post: August 24th, 2009, 01:15 PM
  5. EFI not reading AFR correctly
    By billyjo in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: December 11th, 2006, 10:55 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •