Results 1 to 3 of 3

Thread: is it to late to update?

  1. #1
    Junior Member
    Join Date
    Mar 2011
    Posts
    19

    Default is it to late to update?

    Hello. I have been tunning gm vehicles for quite sometime. I want to buy the Cummins upgrade. But is it to late to still have access to the tables required to delete dpf? Thanks

  2. #2
    Lifetime Member tokymon's Avatar
    Join Date
    Apr 2008
    Posts
    227

    Default

    what color is you v2? if black you should buy a blue one as some dodge will not be supported on the black ones. and no you can still get dpf delete stuff
    97 2500 ecsb 5.7l/4l80e/4x4 411 pcm /thorley tri-y's/dual super 40's with x (catless)/aem cai/msd 6a and coil/zz4 cam/beehive spring/lm-1

    stock sucks

  3. #3
    Lifetime Member
    Join Date
    Nov 2005
    Posts
    1,753

    Default

    CAN based Cummins vehicles are supported on Black FlashScan V2 units.

    Customers should be aware that if/when we do offer support for SCI based Cummins vehicles (2003-05) that these will ONLY be supported on Blue FlashScan V2 devices. In December 2009, we made a circuit board change to support that protocol.

    EFILive does not recommend customers replace their Black FlashScan V2 device for the sole reason of SCI communications protocols until support is available.

    Cheers
    Cindy

Similar Threads

  1. is it to late to update?
    By mathis in forum Cummins 6.7L
    Replies: 1
    Last Post: August 8th, 2013, 03:01 AM
  2. Replies: 4
    Last Post: September 16th, 2012, 08:54 AM
  3. Late 2007 - Early 2008 Silverado 6.0 SD Tune Question
    By Mike Norris in forum E37, E38 & E67 PFI ECM's
    Replies: 9
    Last Post: March 9th, 2010, 06:57 PM
  4. Late model Gm pcm pin
    By timvan in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: May 21st, 2006, 12:34 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •