Page 1 of 6 123 ... LastLast
Results 1 to 10 of 53

Thread: Need blackbox 4L80E tune for my 4L80E segment swap

  1. #1
    Lifetime Member
    Join Date
    Mar 2009
    Posts
    746

    Default Need blackbox 4L80E tune for my 4L80E segment swap

    Long term I think I'd prefer to run the 60E segment, but I if I can flash in a 80E segment and drive home from the shop with all 4 forward gears, that'd be sweet. I didn't see one in the repository and my searching thus far has been fruitless, I'm to the point where I'm ready to pull over suspect vehicles so I can beg to download their stock tunes. Truck in sig is in the ending stages of a 4L80E swap and I need to make it driveable so I can start making money with it.
    1998 GMC Sierra K1500 5.7/4L80E, longtubes, 411 w/COS 5, marine cam/intake, Whipple. 91 octane at 6000'.
    1997 GMC Sierra K3500 7.4/4L80E, 411 w/COS 3, Whipple, small cam.
    2004 Corvette Z06 with longtubes.

  2. #2
    Lifetime Member EagleMark's Avatar
    Join Date
    Dec 2010
    Posts
    466

    Default

    Not sure what OS you have?

    I think theSuburban 7.4L came with 4l80E and OS 09365095

    There's a GMC Siera 5.7L with same OS 09365095

    Both are on Tune File Depot so that should be an easy segment swap?

  3. #3
    Lifetime Member
    Join Date
    Mar 2009
    Posts
    746

    Default

    That 5.7 Has an 80E tune? I'm not at home to be able to open it.
    1998 GMC Sierra K1500 5.7/4L80E, longtubes, 411 w/COS 5, marine cam/intake, Whipple. 91 octane at 6000'.
    1997 GMC Sierra K3500 7.4/4L80E, 411 w/COS 3, Whipple, small cam.
    2004 Corvette Z06 with longtubes.

  4. #4
    Lifetime Member EagleMark's Avatar
    Join Date
    Dec 2010
    Posts
    466

    Default

    No. I beleive the 7.4L is a 4L80E so there is your segment swap to the 5.7L GMC Seira 5.7L. So both halves are available in same OS.

    Problem then is EFI Live will not do a full flash of Black Box PCM. So what OS do you have? If not correct OS for 4L80E then you would need a 7.4L 4l80E PCM and segment swap the 5.7L engine in... it's a pain... and another PCM to license.

    Or have someone with TunerCat full flash the PCM to start?

  5. #5
    Lifetime Member
    Join Date
    Mar 2009
    Posts
    746

    Default

    Well shit, looks like my $1000 transmission swap just became an $1,125 swap. I've got a 411 in the garage, been holding off the swap due to laziness/cheapness. I already have all the tunes I need to get a 411 on the road.
    1998 GMC Sierra K1500 5.7/4L80E, longtubes, 411 w/COS 5, marine cam/intake, Whipple. 91 octane at 6000'.
    1997 GMC Sierra K3500 7.4/4L80E, 411 w/COS 3, Whipple, small cam.
    2004 Corvette Z06 with longtubes.

  6. #6
    Lifetime Member EagleMark's Avatar
    Join Date
    Dec 2010
    Posts
    466

    Default

    Well yeah there's that option too!

    But if you have same OS as the 4l80E file? What is your OS?

  7. #7
    Lifetime Member
    Join Date
    Mar 2009
    Posts
    746

    Default

    16263425

    I ctrl f'd that in the repository and found something weird. The only GMC with that OS claims to be a manual, but in the speedo sections its gear ratios are that of the 4L60E. I was using the speedo section to verify gear ratios to tell me which trans the OS had because 3 Chevies had this OS in the repository.
    1998 GMC Sierra K1500 5.7/4L80E, longtubes, 411 w/COS 5, marine cam/intake, Whipple. 91 octane at 6000'.
    1997 GMC Sierra K3500 7.4/4L80E, 411 w/COS 3, Whipple, small cam.
    2004 Corvette Z06 with longtubes.

  8. #8
    Lifetime Member
    Join Date
    Aug 2006
    Posts
    412

    Default

    I have a .bin for a 1998 5.7, 4L80e truck. You should be able to load this into EFILive and flash it. However this website won't let me attach a .bin. PM me your e-mail address and I will send it to you.

    Jeff
    98 GMC RCSB 2WD, Internally stock 305 w/Twin T-3 junkyard Turbos,4L80e,Ramjet intake,42lb.inj., 0411PCM, COS3,4675LBS w/me in it. Best Time on 5 passes-13.01@110

  9. #9
    Lifetime Member EagleMark's Avatar
    Join Date
    Dec 2010
    Posts
    466

    Default

    I'd like a copy to please?

    Now I've only tried this once, but I still believe it won't work because EFI Live will not do full flash of Vortec PCM.

  10. #10
    Lifetime Member
    Join Date
    Aug 2006
    Posts
    412

    Default

    Quote Originally Posted by EagleMark View Post
    I'd like a copy to please?

    Now I've only tried this once, but I still believe it won't work because EFI Live will not do full flash of Vortec PCM.
    I opened the .bin in EFILive and saved it. Now it is .tun. So, This has been from .bin to .tun I have not tried it on anything. I did notice that there is no VIN in it. Here it is . Use at your own risk.

    Jeff
    Attached Files Attached Files
    98 GMC RCSB 2WD, Internally stock 305 w/Twin T-3 junkyard Turbos,4L80e,Ramjet intake,42lb.inj., 0411PCM, COS3,4675LBS w/me in it. Best Time on 5 passes-13.01@110

Page 1 of 6 123 ... LastLast

Similar Threads

  1. 4l80e 4th gear and tcc problem (running from 4L60E segment)
    By kkustomz in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 35
    Last Post: November 28th, 2011, 01:05 PM
  2. did segment swap to 4l80e have a question
    By Cool28 in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 4
    Last Post: November 3rd, 2011, 10:42 AM
  3. 4L80E segment for OS 09379910
    By vortecyota in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 22
    Last Post: July 18th, 2010, 11:05 PM
  4. 4l80e segment swap!!!
    By hyderm87 in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 9
    Last Post: May 14th, 2009, 02:28 PM
  5. 4l80e segment swap!!!
    By hyderm87 in forum Custom Operating Systems
    Replies: 1
    Last Post: May 12th, 2009, 02:29 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •