Results 1 to 3 of 3

Thread: Which tables don't affect DIC calcs

  1. #1
    Senior Member Wasted Income's Avatar
    Join Date
    Dec 2005
    Posts
    181

    Default Which tables don't affect DIC calcs

    I'm pretty sure I remember hearing that there was a way to add fuel without throwing off the DIC mpg calcs...am I losing it here, or is there a way to do it?

    Thanks guys,
    Jeff
    2005 Silverado Duramax LLY - EFI Live Tuned
    1969 Chevrolet C-10 Pickup - Turbocharged 5.3L/4L80E - EFI Live Tuned
    1975 Avenger Jet Boat - 6.0L/Berkley pump - EFI Live tune in progress

  2. #2
    Lifetime Member McRat's Avatar
    Join Date
    Nov 2005
    Posts
    280

    Default

    You will be very limited as to your HP gains, but if you just modify rail pressure, throttle base, boost and timing, it should have little if any affect on mileage displayed.

    However, this is not practical. What you can do is avoid changing the main fueling tables at the mm3 used for cruising on the highway, 40mm3 and less. While it won't be perfect, it should be closer than what you get when you multiply the entire table.
    2005/2007 DHRA Western Drag Champion
    Bonneville A/DT & B/DT Land Speed Record Holder, 197mph best speed.

    Casper - 05 GMC 2500 Dmax LLY 10.59 @ 129, 916rwhp
    Big Blue - 04.5 GMC 3500SRW LLY 13.12 @ 104, 502rwhp sled puller
    Wendy - 06 GMC 2500 LBZ 12.50 @ 107.5 First LBZ into the 12's. 542rwhp.
    Blue Meanie - 02 Z06 11.40 @ 121 AFR H/C

  3. #3
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    I am no authority on this, but I would think if you want to modify part throttle response etc then just play with the Throttle table and the DIC will stay accurate, once you need more than 100mm3 then you have to alter the main pulse tables, once you do that the DIC will be off.
    Just keep in mind, anytime the injector is open longer (or shorter) by altering the main pulse table you will be out..........Mind you, GM changed it in one of the LLY updates!.

    Cheers,
    Ross
    I no longer monitor the forum, please either post your question or create a support ticket.

Similar Threads

  1. Defuel affect
    By SGFastMax in forum Duramax LB7
    Replies: 4
    Last Post: May 5th, 2010, 11:59 AM
  2. Does the MAFSensor have any affect to starting conditions?
    By onegonewild in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: April 3rd, 2010, 04:46 PM
  3. Why does changing VVT settings affect Shifting of an A6?
    By MN C5 in forum General (Petrol, Gas, Ethanol)
    Replies: 8
    Last Post: September 16th, 2009, 02:00 PM
  4. L.t.f.t closer to 0 affect gas milage?
    By smslyguy in forum Gen III V8 Specific
    Replies: 33
    Last Post: September 1st, 2009, 08:19 AM
  5. Does disabling one NBO2 affect tuning
    By hpcubed in forum General
    Replies: 5
    Last Post: July 18th, 2005, 12:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •