EFILive encourages customers to use this public update in their production environments.
Important:
The boot block software for FlashScan and AutoCal has been updated to increase the stability of USB data transfers under varying environmental conditions. You should update the boot block in your FlashScan and/or AutoCal devices when prompted to by the EFILive Control Panel. If you are not prompted to update the boot block, please manually run the EFILive Control Panel software, select the [F6: Firmware] tab page and update the boot block. After updating the boot block the device will remain in dead-poll until you reprogram the latest firmware into it.
Download here:
Updates:
V7
- Added new LML PIDs to scan tool. (The LML PIDs are still under development, some are currently returning unexpected data).
- Fixed software hanging on start-up and/or shutdown (on some PCs) when FlashScan V2 is connected.
V8
Firmware
- Boot block update to fix USB error $0101.
Known Issues:Please post issues, questions, clarifications (large or small) in this thread.
As issues are reported and confirmed they will be re-posted as "Known Issues" below.
- V1 Devices may not connect to the V7 software after installing this update and using it with a FlashScan V2 or AutoCal device. Workaround: Uninstall this update and re-install V7.5.7.235 (from the downloads page on the EFILive web site).
- V7 pass-thru scan tool does not display trouble codes. Use FlashScan/AutoCal in standalone mode to view trouble codes until the problem is fixed in the next update.
Version Numbers:
After installing the latest release you should have the following software, boot block, firmware versions installed:
EFILive V7 software: V7.5.7 Build 240
To view the installed version, select Help->About (in the V7 Scan or Tune software).
EFILive V8 software: V8.2.2 Build 233
To view the installed version, select Help->About (in the V8 Scan and Tune software).
Boot Block: V2.07.06 (Jul 31, 2013)
To view the installed version, Select F7: Licenses (in the V8 Scan and Tune software).
Firmware: V2.07.48 (Aug 02, 2013)
To view the installed version, Select F7: Licenses (in the V8 Scan and Tune software)