LC-2: Digital Wideband, anyone try it out?

[ecir45]

Thanks you, what you are doing here is above and beyond. Been using mouser for years with exceptional service. Besides the prices what I like the most is if you have a user account you can build BOMs and save projects for future reference. I have like four of so pages of BOMs for past and future projects.

[ecir45]

Can now confirm parts list in my earlier post 39

http://forum.efilive.com/showthread....l=1#post202535



used an old usb cable for the short wip and a old phone headset cable for the cord.

[joecar]

I like the coily

[joecar]

ecir45, do you have any Molex connectors left...?

[ecir45]

Cant recall if I bought more than one, pretty sure I ordered more than I needed of the pins though. Will check later when I get home.

[joecar]

Can now confirm parts list in my earlier post 39

http://forum.efilive.com/showthread....l=1#post202535



used an old usb cable for the short wip and a old phone headset cable for the cord.

What is inside the box (just straight thru wiring...?)...?

[ecir45]

found image on goggle of inside. The pigtail with the Molex connector is hard wired to the box. The coiled wire (4 conductor) is from an old telephone headset with new ends to match schematic.

http://www.computercablestore.com/Su...Sc_PID211.aspx

[joecar]

In V2, when you daisy chain two LC-2's, what are the wideband id numbers (0 and 1, I presume)...?

[joecar]

found image on goggle of inside. The pigtail with the Molex connector is hard wired to the box. The coiled wire (4 conductor) is from an old telephone headset with new ends to match schematic.

http://www.computercablestore.com/Su...Sc_PID211.aspx

Ah, I see, straight thru, thanks.

[ecir45]

In V2, when you daisy chain two LC-2's, what are the wideband id numbers (0 and 1, I presume)...?

Not sure if this was directed at me, I am only using one wideband. If I recall when I installed mine there was a option for both or one, I chose one.