Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: Wierd problem on startup today

  1. #1
    Junior Member
    Join Date
    Feb 2006
    Posts
    48

    Default Wierd problem on startup today

    All, I just upgraded my OS last week to a 2002 (12212156) and the car has been running fine. Although this morning something really weird happened. I went to start the car up and it fired up and immediately died. So I went to start it again it fired and then the tach and speedo both shot up to 7000rpm and 150mph respectively. The car started and the tach and speedo dropped back to their off positions, and then a few seconds later they camr back on and started reading normally. So I put the car in "D" and when I gave it some gas and it nearly died and just fell on its face. It was idleing fine though. It did this a few more times, but once it warmed up it drove just fine.. Any ideas?

    Car is a 1999 Camaro SS A4 226/234 112 cam TCI 3500 stall
    EFILive newbie

    1999 Camaro SS A4 | LME Forged 347 | Yank SS4000 Stall | 226/234 Cam | Patriot LS6 Style heads 2.055 / 1.57 57cc 11.3 SCR | FLP Long tube headers

  2. #2
    Lifetime Member TAQuickness's Avatar
    Join Date
    Jan 2005
    Posts
    2,940

    Default

    I've seen a few threads on this topic on www.ls1tech.com. I don't recall what the cause of the problem was though. Mine does weird stuff like that @ WOT


  3. #3
    Lifetime Member SSpdDmon's Avatar
    Join Date
    Jun 2005
    Posts
    1,558

    Default

    I'd check your wiring to make sure everything is connected tight and the battery has a good ground contact.

  4. #4
    Junior Member
    Join Date
    Feb 2005
    Posts
    24

    Default

    I know what it is :-) The 99s (I own one) had a over sensitive dash panel that would react to voltage issues. In 99% of the cases of this it turns out the be a battery starting to go south, I swapped to a new battery and the problem has not happend again in 2 years.

  5. #5
    Lifetime Member
    Join Date
    Oct 2003
    Posts
    505

    Default

    Quote Originally Posted by TAQuickness
    Mine does weird stuff like that @ WOT
    That's magnetic interference from the Flux capacitor.

  6. #6
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by bink
    That's magnetic interference from the Flux capacitor.
    You mean he's running an unshielded FC...?

  7. #7
    Lifetime Member TAQuickness's Avatar
    Join Date
    Jan 2005
    Posts
    2,940

    Default

    Quote Originally Posted by joecar
    You mean he's running an unshielded FC...?
    I was told I couldn't because of the whole space time continuum thing...
    Last edited by TAQuickness; April 10th, 2006 at 12:08 AM.


  8. #8
    EFILive Distributor dfe1's Avatar
    Join Date
    Jan 2005
    Posts
    837

    Default

    Quote Originally Posted by TAQuickness
    I was told I couldn't because of the whole space time continuum thing...
    That's only for flux capacitors of 2.0 jiggawatts and higher
    DigitalEFI- EFILive US Distributor
    sales@digitalefi.com
    678/344-1590

  9. #9
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    So without a shield it rips a hole in space-time if you're running more than 2.0 JW...? LOL....
    Can we use the hole for time travel, get zero (or negative) 1/4 mile times...? LOL...

    Edit: Sorry we didn't mean to hack up your thread...

  10. #10
    EFILive Distributor dfe1's Avatar
    Join Date
    Jan 2005
    Posts
    837

    Default

    Quote Originally Posted by joecar
    So without a shield it rips a hole in space-time if you're running more than 2.0 JW...? LOL....
    It's obvious you don't realize the gravity of the situation. As Doc Brown once said, "This is some serious shit".
    DigitalEFI- EFILive US Distributor
    sales@digitalefi.com
    678/344-1590

Page 1 of 2 12 LastLast

Similar Threads

  1. Wierd flash problem
    By Tre-Cool in forum 6 speed/8 speed RWD/FWD Transmission Tuning (incl T43, T76, T87)
    Replies: 0
    Last Post: December 15th, 2008, 12:43 AM
  2. Cant log can connect wierd problem
    By 98redorangeta in forum Gen III V8 Specific
    Replies: 4
    Last Post: September 4th, 2008, 01:26 AM
  3. eSI startup problem...
    By joecar in forum Lounge
    Replies: 0
    Last Post: October 21st, 2007, 04:29 PM
  4. Very wierd ETC problem...
    By dc_justin in forum Gen III V8 Specific
    Replies: 10
    Last Post: August 8th, 2007, 08:55 AM
  5. Wierd problem. 3 BAR MAP max's out at half throttle??
    By nitrorocket in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: September 11th, 2005, 01:47 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •