lc1 wb goes away when car started
my wb lc1 shows up on ignition on eng off but when started no longer shows up , goes away and does the flashing led. am i missing something i did just replace sensor and calibrated it. these connections are serial through v2 and phone plug type connection i did set up v2 for wb lc1 and saved.
2001 z06 236-242 617-622 114 lsa headers off rd exhaust haltec int. ls6 int. 315/35/18 drag radial ,cos #5 , 100 shot nos!
2007 tbss headers off rd 4 inch intake, 160 stat , efans,2wd, 275,315,s
2013 sonic rs auto
2006 3500 chevy pu duramax/alli,
My procedure is to never plug/unplug the LC1 serial connection when my V2 is powered up. I start my car then wait a few seconds for the WB to warm up (solid LED on) before I begin viewing or recording data on the V2. Can you confirm the V2 is still configured for the LC1 by going through the on screen set-up. This is all done in my car with the V2 black box, no laptop.
You mean you can see it displayed on the V2 LCD and then when you start engine, V@ stops showing it...?
What does V2 show...?
How are you powering your LC-1...?
i moved it away from spark plug wire , seems good now. thanks guys, i guess that box doesnt like sparky!
2001 z06 236-242 617-622 114 lsa headers off rd exhaust haltec int. ls6 int. 315/35/18 drag radial ,cos #5 , 100 shot nos!
2007 tbss headers off rd 4 inch intake, 160 stat , efans,2wd, 275,315,s
2013 sonic rs auto
2006 3500 chevy pu duramax/alli,
Posting Permissions
Reply With Quote