Results 1 to 7 of 7

Thread: Valet Mode

  1. #1
    Lifetime Member ZL1Killa's Avatar
    Join Date
    May 2005
    Posts
    250

    Default Valet Mode

    I want to do this, as we have invested a lot of time and money into the car and we don't want to lose anything that we have done. Don't want to buy an aftermarket alarm, I would rather use what I have and not allow the car to go over such a speed or RPM. Could someone explain the valet mode to me completely.

    i do understand that you wire directly to the pcm and have a switch that, when on, limits the rpm and the speed(?)

    I'm upgrading to COS 3 on my 2001 TA WS6 6spd
    01 T/A WS6 #4984 STOCK 342HP and 352TQ [/b]MODS:Too many to list, PM...funny rear mount.. father/son build.
    [Quote :ur car is sneezing!!!!]
    I KNOW KUNG FU.
    My STS build: http://www.ls1tech.com/forums/showthread.php?t=631954
    453HP 475TQ @6psi
    .....CAM'd, IC'd, and 7psi'd #'s coming.....

  2. #2
    Lifetime Member ZL1Killa's Avatar
    Join Date
    May 2005
    Posts
    250

    Default

    found it....oops
    01 T/A WS6 #4984 STOCK 342HP and 352TQ [/b]MODS:Too many to list, PM...funny rear mount.. father/son build.
    [Quote :ur car is sneezing!!!!]
    I KNOW KUNG FU.
    My STS build: http://www.ls1tech.com/forums/showthread.php?t=631954
    453HP 475TQ @6psi
    .....CAM'd, IC'd, and 7psi'd #'s coming.....

  3. #3
    Lifetime Member SinisterSS's Avatar
    Join Date
    Sep 2003
    Posts
    409

    Default

    Just don't bump your hidden switch when driving down the freeway in a pack of cars. Not that I'd know....

    COS3
    2009 Z06 LS7 / 2008 Sierra Denali AWD L92 6L80E
    Flashing control modules since 2001. 8-)
    Who needs a MAP sensor on a supercharged LS6 anyway.


  4. #4
    Lifetime Member TAQuickness's Avatar
    Join Date
    Jan 2005
    Posts
    2,940

    Default

    i've rigged mine to work with my alarm. if someone does steal the car, i can walk faster than they can get away.


  5. #5
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Should have seen the neighbours when I was testing this watching my 'crappy GM car' coughing and spluttering down the street
    Also, Custom O.S #2 will do valet mode fine as well.

    Cheers,
    Ross
    I no longer monitor the forum, please either post your question or create a support ticket.

  6. #6
    Lifetime Member ZL1Killa's Avatar
    Join Date
    May 2005
    Posts
    250

    Default

    so once you get COS 3 installed...and get a tune that you were last running in the car, and wire up the switch. you can then set the valet mode speed to what you want, and with the switch off...hope to god its off!! etc.....
    wire it up wrong..lol
    01 T/A WS6 #4984 STOCK 342HP and 352TQ [/b]MODS:Too many to list, PM...funny rear mount.. father/son build.
    [Quote :ur car is sneezing!!!!]
    I KNOW KUNG FU.
    My STS build: http://www.ls1tech.com/forums/showthread.php?t=631954
    453HP 475TQ @6psi
    .....CAM'd, IC'd, and 7psi'd #'s coming.....

  7. #7
    Lifetime Member ZL1Killa's Avatar
    Join Date
    May 2005
    Posts
    250

    Default

    Quote Originally Posted by SinisterSS
    Just don't bump your hidden switch when driving down the freeway in a pack of cars. Not that I'd know....

    COS3
    OH DEAR!!!...what would it do? cuz from what you say it sounds bad...



    I also read about performing a full flash to upload the COS 3 to the computer...and I see the warning in one of the pdf files....if i follow the COS upgrade tutorial i shouldn't have a problem right?

    and how do you do a FULL reflash...just click Program PCM calibration like normal when flashing a tune...and then load your tune after full flash and flash that...check for sane values..then flash again

    have i got it right so far?? LOL
    Last edited by ZL1Killa; April 10th, 2006 at 01:13 AM.
    01 T/A WS6 #4984 STOCK 342HP and 352TQ [/b]MODS:Too many to list, PM...funny rear mount.. father/son build.
    [Quote :ur car is sneezing!!!!]
    I KNOW KUNG FU.
    My STS build: http://www.ls1tech.com/forums/showthread.php?t=631954
    453HP 475TQ @6psi
    .....CAM'd, IC'd, and 7psi'd #'s coming.....

Similar Threads

  1. valet mode
    By vortecfcar in forum General (Diesel)
    Replies: 5
    Last Post: September 5th, 2007, 02:53 AM
  2. E40 Valet mode?
    By ringram in forum Custom Operating Systems
    Replies: 1
    Last Post: April 27th, 2007, 09:21 PM
  3. Can Valet mode be used to turn SD mode off and on?
    By ForcedC5 in forum General (Petrol, Gas, Ethanol)
    Replies: 5
    Last Post: May 17th, 2005, 10:53 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •