Results 1 to 3 of 3

Thread: CSP5 {A9643} Enabled or Disabled?

  1. #1
    Junior Member xploitdiesel's Avatar
    Join Date
    Jun 2012
    Posts
    27

    Question CSP5 {A9643} Enabled or Disabled?

    Click image for larger version. 

Name:	csp5 output.png 
Views:	272 
Size:	104.1 KB 
ID:	15888

    Here's what my table reads by default. Before I flash a CSP5 tune, will this need to be disabled or the RPM threshold need to be lowered below 750RPM for CSP5 switching to take effect? CSP5 is new to me.

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Those parameters are only for controlling the switchable output, not the actual CSP5 tune switching.
    It's probably best to wait a week or two as all the CSP5 stuff has been updated and old versions will no longer work with the newer software.
    I no longer monitor the forum, please either post your question or create a support ticket.

  3. #3
    Junior Member xploitdiesel's Avatar
    Join Date
    Jun 2012
    Posts
    27

    Default

    Thanks!

Similar Threads

  1. Replies: 23
    Last Post: December 5th, 2019, 07:14 PM
  2. Stall Converter unlocks when cruise is enabled.
    By hsv084 in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 9
    Last Post: March 9th, 2014, 04:57 PM
  3. EGR not disabled
    By killerbee in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 12
    Last Post: January 19th, 2010, 04:11 PM
  4. Anyone fully disabled Pilots?
    By LBZoom in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 3
    Last Post: May 1st, 2009, 03:37 PM
  5. GEN IV swap AFM is not enabled
    By harascho in forum Gen IV V8 Specific
    Replies: 63
    Last Post: January 29th, 2009, 06:01 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •