EFILive encourages customers to use this public update in their production environments.
Download here:
Updates:
V7
- Fixed E40.INVLVTMP_M PID scaling.
V8
- Fixed LBZ/LMM *.ctd files causing "Integer Overflow" errors when loaded into EFILive V8.
- Fixed test flash failures on T43, E92, E83,E78 and E39 controllers.
- Fixed Access Violation when user's locale uses a Chinese character set.
- Fixed locking problem with E38, E54 and E60 auto-lock.
Firmware
- Added DSP5/CSP5 switching to AC simple menu.
- If only one PID selection is programmed into an AutoCal/FlashScan, then starting data logging or switching tunes will not prompt the user for a PID selection. The device will automatically use that PID selection.
- Fixed System Readiness Test Results which were displaying some "Ready" tests as "Not Ready" in the BBL option "Record All Diags".
Known Issues:Please post issues, questions, clarifications (large or small) in this thread.
As issues are reported and confirmed they will be re-posted as "Known Issues" below.
- Installing this update will not install the Cummins CSP-5 calibration (*.calz) definition files. The CSP-5 definition files are not complete yet and are not included in this update. To restore access the old Cummins CSP-5 *.calz files, install the current public release from our web site download, then install this version over the top of that one.
Version Numbers:
After installing the latest release you should have the following software, boot block, firmware versions installed:
EFILive V7 software: V7.5.7 Build 243
To view the installed version, select Help->About (in the V7 Scan or Tune software).
EFILive V8 software: V8.2.2 Build 235
To view the installed version, select Help->About (in the V8 Scan and Tune software).
Boot Block: V2.07.06 (Jul 31, 2013)
To view the installed version, Select F7: Licenses (in the V8 Scan and Tune software).
Firmware: V2.07.50 (Sep 18, 2013)
To view the installed version, Select F7: Licenses (in the V8 Scan and Tune software)