hey guys need a cable to connect my new Lm-2 to my v2 taq website is down has been for ages any ideas on where to get them from or do i have to make one?
cheers james.
Lm-2 to v2 cable
hey guys need a cable to connect my new Lm-2 to my v2 taq website is down has been for ages any ideas on where to get them from or do i have to make one?
cheers james.
You will have to make a cable.
Flashscan-to-LM-2-Serial-Cable
Surely we have a forum member that knows where the stuff can be sourced to make a cable. The cable I have only uses 3 of four poles coming from the serial output to the EFILive RS232 plug.
Isn't there a better alternative to buying the Innovate serial programming cable (#3840) and putting the RJ11 connector on it? The lowest price I've seen on the Innovate cable is about $20 delivered & a pack of RJ11 ends is about $6 plus tax from the big box home improvement stores.
I have to believe there is a better less costly way to make the cable. Somebody probably sells that molex plug & a piece of cable for around $5, but who?
Does Google or Ebay produce any results...?
You need to know more than I know to do a proper search. I tried to identify the molex plug that connects to the LC-1, LM-2, but I could not find it after searching for it for quite a while. I imagine if I knew a number or other identifier for the molex plug I might be able to come up with something.
OK. It's a Molex micro-fit receptacle that's required. #43025-0400
Last edited by SOMhaveit; September 30th, 2013 at 10:34 AM.
Ok, other than Molex, I would not have known that is the name of it (I don't have a LM-2).
I see they're cheap, what is the minimum quantity they make you buy...?
Posting Permissions
Reply With Quote