Results 1 to 2 of 2

Thread: E38 Calc Ben requires fixing?

  1. #1
    Lifetime Member Tre-Cool's Avatar
    Join Date
    Feb 2006
    Posts
    937

    Default E38 Calc Ben requires fixing?

    Is there anyway to have the calc ben's for e38 calculate off lambda instead of afr?

    My innovate mtx-l's can be programmed to different fuel's and different outputs. i.e lambda/afr and i have them display lambda on the guages.

    However i've found that if i leave it set to petrol - 14.68afr.

    because im running ethanol with say a 80% mixture the ben's are completly up the shit. i.e saying 1.38+ because the commanded goes to say 9.43 and the WB-Serial afr says it's 13.63. however lambda is correct at .913.

    Click image for larger version. 

Name:	broken-ben.jpg 
Views:	282 
Size:	154.3 KB 
ID:	15907

  2. #2
    Lifetime Member Tre-Cool's Avatar
    Join Date
    Feb 2006
    Posts
    937

    Default

    okay, i seemed to have worked out a solution, but it's a bit dirty.

Similar Threads

  1. CALC.PID for E38?
    By samh_08 in forum Tuning For Economy
    Replies: 5
    Last Post: May 30th, 2013, 01:52 PM
  2. E38 - Serial Lambda Logging - Custom BEN factor PID?
    By tunedportcj5 in forum Gen IV V8 Specific
    Replies: 5
    Last Post: January 30th, 2012, 09:28 AM
  3. Replies: 1
    Last Post: December 15th, 2011, 05:59 PM
  4. BEN is only for analog, right? How do I log BEN with serial logging?
    By Supercharged111 in forum General (Petrol, Gas, Ethanol)
    Replies: 18
    Last Post: July 12th, 2009, 05:08 PM
  5. E38 Calc VE broken?
    By ringram in forum Petrol / Gas
    Replies: 7
    Last Post: November 30th, 2008, 02:52 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •