Results 1 to 4 of 4

Thread: Relearn turbo sensor

  1. #1
    New Member
    Join Date
    Sep 2013
    Posts
    1

    Default Relearn turbo sensor

    Hi, I replaced my turbo vain position sensor on my lbz and need to relearn it, I am new to the v2 still, would anyone be able to help me and explain how to go through that procedure on how to relearn it? Thanks

  2. #2
    Junior Member Donovan's Avatar
    Join Date
    Sep 2007
    Posts
    44

    Default

    Why are you sure that you need to learn it? Do you have a P003A? On my truck it stopped coding after I dropped in a new turbo.

    Checkout the "VNT Offset Learn" dvt in the scan tool. I think that is what it does. I haven't tested it though. According to the GM tech manual you need to be at idle and up to temp in order to do the learn procedure.

    I have also read that you can flash a new tune in which will zero the turbo learned position as well which will cause the procedure to occur. I have not tested this.
    E35A/A40 + DSP5

  3. #3
    New Member
    Join Date
    Aug 2017
    Posts
    1

    Default

    I have a p003a code and I just put a stealth 64 on my lbz. Iv tried a lot ot get rid of it but flashing it is my next option after putting the new vps on. I'll post my updates.

  4. #4
    New Member
    Join Date
    Feb 2018
    Posts
    1

    Default

    What did you end up finding out. I just installed a stealth 64 and mine is throwing a po3a code and won

Similar Threads

  1. Turbo Vane Sensor
    By chaserose in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 0
    Last Post: June 8th, 2013, 01:15 AM
  2. Crank sensor relearn 97 chevy truck
    By Gregs in forum General
    Replies: 4
    Last Post: March 29th, 2010, 01:21 AM
  3. 02 sensor locaion for my ls turbo nova
    By 73 Nova Guy in forum Gen IV V8 Specific
    Replies: 0
    Last Post: November 26th, 2009, 02:59 AM
  4. Closing turbo vanes for turbo braking?
    By Haulinbass02 in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 19
    Last Post: May 14th, 2009, 11:12 AM
  5. E38 Crank Position Sensor Relearn
    By hapnermw in forum Gen IV V8 Specific
    Replies: 3
    Last Post: May 2nd, 2009, 03:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •