Results 1 to 4 of 4

Thread: Calculated pids not displayed on V2

  1. #1
    Member
    Join Date
    Apr 2010
    Posts
    62

    Default Calculated pids not displayed on V2

    Hi, I have a custom list of pids i like to display on my V2. I have added some calculated ones like "engine oil pressure" and a "fuel rail pressure" pid i configured using the EGR input. They work in the scan software but not on my V2. I programmed them to the unit but they just dont show up in the list. Is there any tricks or something I may have missed? Cheers

  2. #2
    Lifetime Member darcy's Avatar
    Join Date
    Feb 2012
    Posts
    223

    Default

    No tricks - V2 simply can't display calc pids.

  3. #3
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    +1 calc pids do not display on V2... you have to view them in the V7 scantool.


    When you program calc pids into your V2, a BBL log will note the fact that you want these calc pids selected when the log is opened in the V7 scantool (otherwise you have to manually select them (and save them into the log) after the fact (when viewing the log)).

  4. #4
    Member
    Join Date
    Apr 2010
    Posts
    62

    Default

    Ok, that explains it then. Thanks for the replys. It would be great if there was an updated firmware released that allowed the calc pids to be displayed on the V2

Similar Threads

  1. How to modify calculated PIds
    By 2000ssnb in forum Tips and tricks
    Replies: 12
    Last Post: July 4th, 2008, 03:14 AM
  2. Replies: 1
    Last Post: April 27th, 2005, 12:19 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •