Results 1 to 1 of 1

Thread: CSP5 Switches Now Shipping!

  1. #1
    EFILive Distributor Trippin's Avatar
    Join Date
    May 2004

    Default CSP5 Switches Now Shipping!

    CSP5 Switches Now Shipping!

    Two versions available. One with a 90 degree OBDII connector, one with a "pass through" OBDII connector.

    Pass through CSP5 cables (which allow the use of other OBDII monitoring devices to be used in conjunction with CSP5 switchable tuning) may be installed by removing the truck’s existing OBDII connector from the bracket under the dash by depressing the tabs on either end of the connector. This will allow the connector to be removed from the back of the bracket and inserted into the female plug of the CSP5 connector. The male portion of the CSP5 cable can then be inserted through the dash bracket and the OBDII cable from the auxiliary monitoring device can be attached to the male portion of the CSP5 connector, which will hold the entire assembly in place in the dash bracket.

    Pass through pic below.

    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	pass.jpg 
Views:	463 
Size:	427.2 KB 
ID:	15950

    EFILive-DSP5......Switch your Attitude!
    EFILive-CSP5......The Smart Way To Switch Your Cummins Tunes!
    EFILive-DSP4......Switch Your Colorado and Canyon Too!

Similar Threads

  1. Csp5 switches
    By cumminsDK in forum Cummins 5.9L
    Replies: 5
    Last Post: January 22nd, 2013, 04:56 PM
  2. Replies: 4
    Last Post: August 9th, 2009, 10:48 AM
  3. Dashboard switches to metric sometimes
    By Jakes4321 in forum FlashScan V2
    Replies: 3
    Last Post: June 8th, 2007, 04:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts