Problem with Calc.VET

[joecar]

Attachment 15971

Changed back what you have requested.
Thanks for your help JOECAR!!

Just wanted to touch base here since the weather is nearly perfect for tuning. Is this a good starting point to work on the VE?

Thanks!

I looked thru your file and it looks good to start the Calc.VET procedure (which corrects MAF and calculates VE).

[onegonewild]

I have a pretty decent log so far. Let me know what you think!

Will add filters to clean up the data, but is looking good!

Log_0000.efi

[joecar]

I'll look later today (I've been swamped yesterday).

[joecar]

I have a pretty decent log so far. Let me know what you think!

Will add filters to clean up the data, but is looking good!

Log_0000.efi

You have 26 pid channels which results in only 5 frames/second...

Can you reduce the pid channel count to 24 (or less), this will get you 10 frames/second (more/closely spaced data).

[onegonewild]

Will do. The weather here is topping out around 60 degrees. Is this still a decent temperature for tuning? What temperature range for outside ambient is suitable for tuning?

[joecar]

Yes, that ambient temperature is ok, alto I'm used to warmer weather around 80.

Take your time, I've got an emergency going on with our pet cat.