Originally Posted by
Blacky
Given that I have very little info to work with (which is why it is always a good idea to log a help desk request and supply all the info in the first place), I can try and offer one suggestion...
If you are logging a vehicle with an automatic transmission, say an E38 and T43 combo, and your BBL PIDs are set up to include both the E38 and T43 controllers, but if you only have ECM PIDs selected or only have TCM PIDs selected, then no data will be logged because whichever controller has no PIDs selected for it will never transmit any data and each frame of data is only recorded by FlashScan/AutoCal when both controllers have sent a complete frame.
So if you are only logging ECM PIDs, then unselect the T43 TCM and if you're only logging TCM PIDs, then unselect the E38 ECM. The same goes for any ECM/TCM combo.
Regards
Paul