Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18

Thread: E67_AFRATIO_DMA is not working properly ?!!

  1. #11
    Member
    Join Date
    Sep 2006
    Posts
    74

    Default

    calc_pids.txt


    Yes E10 for pump gas.
    Last edited by finishline; August 30th, 2015 at 10:09 AM.

  2. #12
    Member
    Join Date
    Sep 2006
    Posts
    74

    Default

    I'll have to go make you a quick log file. I wasn't saving anything since I wasn't making any forward progress.

  3. #13
    Member
    Join Date
    Sep 2006
    Posts
    74

    Default

    2013 ZL1 E67 AFR Log.efi

    Short log file as requested. I can't thank you enough Joe.

  4. #14
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Try this calc_pids.txt...
    Attached Files Attached Files

  5. #15
    Member
    Join Date
    Sep 2006
    Posts
    74

    Default

    Thanks Joe, I'll give it a try right now.
    Last edited by finishline; August 30th, 2015 at 01:10 PM.

  6. #16
    Member
    Join Date
    Sep 2006
    Posts
    74

    Default

    Looks Great! Local test drive appears to be perfect. I'll let you know how the dyno goes tomorrow. We can just start passing this file around to everyone else that needs it.

    Thanks again,

    Randy

  7. #17
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Randy,

    Yes, please pass it around to who ever needs it...

    but please tell them to use CALC.WO2BEN for tuning, and that CALC.FUEL.AFR is for viewing/info only.

  8. #18
    Member
    Join Date
    Sep 2006
    Posts
    74

    Default

    The tune went very well on the dyno and would not have been possible without your help! The air fuel dialed in perfectly. Thanks again Joe!

Page 2 of 2 FirstFirst 12

Similar Threads

  1. E39_AFRATIO_DMA is not working properly
    By wesam in forum E39, E80, E82 & E92 SIDI ECM's
    Replies: 2
    Last Post: June 20th, 2013, 04:51 AM
  2. Properly logging MAF
    By ForcedC5 in forum Gen III V8 Specific
    Replies: 5
    Last Post: January 7th, 2013, 06:32 PM
  3. Cruise not working properly after tire calibration
    By Max Power in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 7
    Last Post: August 30th, 2012, 12:26 PM
  4. External flashscan inputs (EXT.AD1 & EXT.AD2) are not working properly!
    By TransAm-Z in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: July 31st, 2011, 08:25 AM
  5. Why Can't I get my DSP 5 to work properly
    By Dr.Gixxer in forum Duramax LLY
    Replies: 4
    Last Post: May 4th, 2011, 05:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •