I am in the middle of a project that I just got stuck with.
The vehicle is a 2000 Camaro with a built engine. The engine has ported heads with a comp cams thumper cam I believe 109 separation with 282/303 duration and 227/241 at .050, aftermarket intake, headers.
This engine will not idle at all, if started engine just dies. If I hold throttle open I can get the car to stay running but must be held above 1000 rpm. I can not get the car to idle to perform the the logs.
I have attached the file from the car. Any help to get to idle and tuned would be greatly appreciated.
Thank you for your help in advance.