A0016 Pulling 1.5* - 2.0* more than Commanded.

[3fingas]

I believe I zero'd and disabled every table that would pull timing. Kind of stuck on this one. I am going on its in the COS because my base motor timing is consistent. A search revealed nothing on this. I can just account for the added retard when tuning or maybe someone knows something on this or can shed some light.

Thanks in advance.



376LSX_350.tun
xxxx.efi

[3fingas]

Maybe something wrong with the software? IDK

[joecar]

I'm looking thru your tune...

[3fingas]

Thanks Joe

[joecar]

I'm looking thru your tune/log and I see 11° to 13° commanded...

but spark tables have 28° for those conditions, and I don't see yet what is causing the big difference in timing...

[3fingas]

Base timing is 28*, through COS5, I'm pulling 12 which should net me 16*. either I'm missing something or the COS5 doesnt want to listen. LOL

[joecar]

Hmmm, I missed something, I'm having a day, I'll go back and look at your tune again.

[3fingas]

Im guessing it might not be in the tune.

[John02SS]

You ever figure the issue out?

[3fingas]

You ever figure the issue out?

No, no one ever could identify the issue.

I was ready for a little more capability and installed the Holley Dominator.