Here is my current open loop tune to start AUTO.VE with:
OLPreFAST.ctz
The truck starts great, then dies a second or two after. If I hit the accelerator it dies quicker.
1. Does that mean it is getting too much GAS or too much AIR?
2. And either way, how do I go about adjusting for that?
Log of start is attached below, disregard AFR for now because gauge was apparently off and needs to be recalibrated.
LS1B_0178.efi
3. Is there anything special I need to do in the tune with no MAF being plugged in?