I also attached screen shots of the VE table in my current tune showing the properties-
This stuff is what trips me up- The table clearly shows 'MAP kPA' but the properties shows otherwise.
When I change it to g*K/kPa, the display remains the same. How does one know when these need to be changed and to what unit of measure?
Looks like I am in a holding pattern with the Calc.VET for now until the weather becomes good enough to physically take the car out and get some 'real' logs.
In the meantime, I can play with RAFIG so I can at least get a feel for it.
Please let me know if there is anything you (or I) need to look at in the meantime.
As always, thank you for your time and patience,
Elm
CALC.VET_Table.pdf
VE_Display.pdf