Page 4 of 4 FirstFirst ... 234
Results 31 to 40 of 40

Thread: Analog wideband help for new starters

  1. #31
    Junior Member
    Join Date
    Nov 2013
    Posts
    35

    Default

    Quote Originally Posted by joecar View Post
    What about the ground wire...?
    Yes the input has a ground wire the unit uses two ground wires, at the start of this thread i was asking about whats needed after this is all done.

  2. #32
    Lifetime Member darcy's Avatar
    Join Date
    Feb 2012
    Posts
    223

    Default

    Quote Originally Posted by braapp View Post
    Can these pids be found in the v7 list.
    Those are standard calculated pids, so should be visible. If you can't see them, check that the "Supported" box is unticked

  3. #33
    Junior Member
    Join Date
    Nov 2013
    Posts
    35

    Default

    Quote Originally Posted by darcy View Post
    Those are standard calculated pids, so should be visible. If you can't see them, check that the "Supported" box is unticked
    No worries ill have a go at that i thought the unsupported pids did not work for an ls1b computer thanks again Darcy hopefully i can get somewhere with this today.

  4. #34
    Junior Member
    Join Date
    Nov 2013
    Posts
    35

    Default

    That worked Darcy your a legend will that be accurate enough to run autove?

  5. #35
    Lifetime Member darcy's Avatar
    Join Date
    Feb 2012
    Posts
    223

    Default

    Quote Originally Posted by braapp View Post
    That worked Darcy your a legend will that be accurate enough to run autove?
    If you're full gasoline (no ethanol), with your stoich set at 14.68 {B3601}, the error is less than 0.2% - so inconsequential.

  6. #36
    Junior Member
    Join Date
    Nov 2013
    Posts
    35

    Default

    Quote Originally Posted by darcy View Post
    If you're full gasoline (no ethanol), with your stoich set at 14.68 {B3601}, the error is less than 0.2% - so inconsequential.
    Yeah mate just 98 for the time being, ill check that table and on my next days of I'm going to have a go at autove if everything is accurate and it should be.

    Thanks again Darcy for sharing the info.

  7. #37
    Junior Member
    Join Date
    May 2012
    Posts
    13

    Default

    Where do you find the connector that goes into the V1?

    I'm trying to hook up dual widebands and need the little connector - with, or without a pigtail.

    TIA

  8. #38
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by C5 Pete View Post
    Where do you find the connector that goes into the V1?

    I'm trying to hook up dual widebands and need the little connector - with, or without a pigtail.

    TIA
    Orange connectors usually would have come come with V1/V2...

    try contacting a reseller: http://www.efilive.com/distributors

  9. #39
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by C5 Pete View Post
    Where do you find the connector that goes into the V1?

    I'm trying to hook up dual widebands and need the little connector - with, or without a pigtail.

    TIA
    Hi Pete, please email me at joecar@socal.rr.com
    Last edited by joecar; March 14th, 2014 at 12:23 PM.

  10. #40
    Junior Member
    Join Date
    May 2012
    Posts
    13

    Default

    Thanks guys. I bought it used and don't seem to have these connectors.

Page 4 of 4 FirstFirst ... 234

Similar Threads

  1. Error $5 (analog wideband logging)
    By rumblebox in forum FlashScan V2
    Replies: 25
    Last Post: August 22nd, 2013, 04:07 AM
  2. Analog wideband install?????
    By T&A Custom Rides in forum General
    Replies: 5
    Last Post: January 30th, 2012, 07:52 PM
  3. Replies: 9
    Last Post: November 16th, 2011, 02:17 AM
  4. Autronic MAFM1 wideband analog to V2
    By APS Luis in forum External A/D inputs
    Replies: 4
    Last Post: July 10th, 2011, 01:30 PM
  5. Lost all wideband analog and serial pids
    By Wichita Dyno in forum General
    Replies: 13
    Last Post: August 23rd, 2010, 03:24 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •